778 Sample Processor (2 pumps)

778 Sample Processor (2 pumps)
Order Number: 2.778.0020
Sample Processor with one workstation and 2 pumps for the automatic processing of small to medium numbers of routine samples in combination with Titrinos or pH/ion meters. Compact system thanks to built-in pump for rinsing the titration vessel. A peristaltic or membrane pump can be connected to the Sample Processor for aspirating off the titrated solution (optional). Direct connection and control of stirrers and Dosinos via MSB. Control takes place via a Controller or the tiamo PC software.
  • Documents
  • Included parts
  • Options

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Sleeve with SGJ 14/12 mm
    6.1236.020
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm and O-ring.

    2 piece(s)

  • SGJ stopper / B-14/(15)
    6.1446.000
    SGJ stopper / B-14/(15)

    5 piece(s)

  • Stopper
    6.1446.010
    Stopper
    Used with Sample Changers

    3 piece(s)

  • Thermometer stopper, B-14/15, oblique insertion
    6.1446.160
    Thermometer stopper, B-14/15, oblique insertion
    To have the inserts of the 6.1458.010 titration head in a sloping position.

    1 piece(s)

  • Aspiration tip / M8 thread
    6.1543.170
    Aspiration tip / M8 thread

    Aspiration tip for the Sample Processors.


    1 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    2 piece(s)

  • FEP tubing / M6 / 80 cm
    6.1805.110
    FEP tubing / M6 / 80 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 48 cm
    6.1805.420
    FEP tubing / M6 / 48 cm
    With light and kink protection

    3 piece(s)

  • PTFE tubing / M8 / 60 cm
    6.1805.510
    PTFE tubing / M8 / 60 cm

    With protection against kinks.


    1 piece(s)

  • 
    PTFE tubing 4 mm / 6 mm / 4 m
    6.1812.000
    PTFE tubing 4 mm / 6 mm / 4 m

    2 piece(s)

  • 
    Coupling 4 mm / 6 mm / M8 inner
    6.1820.070
    Coupling 4 mm / 6 mm / M8 inner

    For extending aspiration tubing in automated systems. Connects the M8 aspiration tubing directly to the 6.1812.000 PTFE tubing.


    1 piece(s)

  • PVDF connection nipple
    6.1828.000
    PVDF connection nipple

    For 6.1621.000 canister.


    2 piece(s)

  • Buret tip clip (magnetic stirrer)
    6.2042.020
    Buret tip clip (magnetic stirrer)
    Clip for proper alignment of buret tips, dosing or aspiration tubings using a magnetic stirrer in the titration beaker of a sample changer

    1 piece(s)

  • Cable clip
    6.2053.000
    Cable clip
    Cable clip for fastening cables and tubes

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2.5 mm
    6.2621.140
    Hexagon key 2.5 mm

    1 piece(s)

  • Guiding sleeve
    6.2709.070
    Guiding sleeve
    For fixation of buret and dosing tips in titration heads and electrode holders

    3 piece(s)

  • Spray nozzle
    6.2740.020
    Spray nozzle

    For the fine-spraying of the rinsing solution.


    3 piece(s)

  • Safety shield
    6.2751.080
    Safety shield


    Safety shield for single-tower Sample Processors without 786 Swing Head.


    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 741 Magnetic Stirrer
    2.741.0010
    741 Magnetic Stirrer

    Magnetic stirrer for sample changers.

    The magnetic stirrer is located beneath the sample rack.

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

  • Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    6.1458.010
    Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    With 6xSGJ 14 and 3x SGJ 9 apertures.
  • 
    Titration head /4 x M10 connectors
    6.1458.020
    Titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • 
    KF titration head /4 x M10 connectors
    6.1458.030
    KF titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • Titration Head, 3 x SGJ 14
    6.1458.040
    Titration Head, 3 x SGJ 14
    Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.
  • Titration head / 2 x SGJ 14
    6.1458.070
    Titration head / 2 x SGJ 14
    Titration head for 75 mL beakers. With 2 openings SGJ 14, 2 openings 6.4 mm, 1 opening M10 and 3 pre-mounted dosing tips. Suitable for rinsing and aspiration equipment.
  • Sample rack 12 x 250 mL
    6.2041.310
    Sample rack 12 x 250 mL
    Sample rack for 12 x 250 mL, one row
  • Sample rack 16 x 150 mL
    6.2041.320
    Sample rack 16 x 150 mL
    Sample rack for 16 x 150 mL samples, one-row
  • Sample rack 24 x 75 mL
    6.2041.340
    Sample rack 24 x 75 mL
    Sample rack for 24 x 75 mL samples, one-row.
  • Sample rack for 12 x 150 mL
    6.2041.360
    Sample rack for 12 x 150 mL
    Sample rack for 12 x 150 mL samples, one-row
  • Sample rack 14 x 200 mL
    6.2041.370
    Sample rack 14 x 200 mL
    Sample rack for 14 x 200 mL samples, one-row
  • Sample rack 14 x 235 mL
    6.2041.380
    Sample rack 14 x 235 mL
    Sample rack for 14 x 235 mL samples, one-row
  • Sample rack 16 x 120 mL
    6.2041.390
    Sample rack 16 x 120 mL
    Sample rack for 16 x 120 mL samples, one-row
  • Sample rack 21 x 100 mL (COD)
    6.2041.460
    Sample rack 21 x 100 mL (COD)
    Sample rack 21 x 100 mL for the determination of COD
  • Sample rack 22 x 120 mL
    6.2041.470
    Sample rack 22 x 120 mL
    Sample rack for 22 x 120 mL samples (6.1459.300), single-row.
  • Drip pan for 778/810/814/838/858 Sample Processors
    6.2711.060
    Drip pan for 778/810/814/838/858 Sample Processors

    Drip pan for 778, 810, 814, 838, 858 Sample Processors