930 Metrohm Combustion IC DR

930 Metrohm Combustion IC DR
Order number: 2.930.9020

The 930 Metrohm Combustion IC enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, e.g., the Combustion Module from Analytik Jena (2.136.0700), the 920 Absorber Module, the 930 Compact IC Flex Oven/SeS/Deg, the 800 Dosino for suppressor regeneration and the MagIC Net software.

If necessary, the 930 Metrohm Combustion IC package can be supplemented with an Autosampler for solid or liquid samples (MMS 5000 Autosampler). The entire analysis, including sample input and sample digestion, is completely automated and is completely controlled by MagIC Net.

  • Documents
  • Included parts
  • Opt. equipment
  • Automation in ion chromatography – Save time and money through fully automated sample preparation and analysis (english)
    • Automation in der Ionenchromatographie – Zeit und Kosten sparen durch voll automatische Probenvorbereitung und Analyse (deutsch)
  • Brochure: Combustion Ion Chromatography – Fast and reliable determination of halogens and sulfur using pyrohydrolysis (english)
    • Prospekt: Combustion Ion Chromatography – Schnelle und zuverlässige Bestimmung von Halogenen und Schwefel mittels Pyrohydrolyse (deutsch)
    • Folleto: Cromatografía iónica de combustión: determinación rápida y fiable de halógenos y azufre mediante pirohidrólisis (español)
  • Brochure: Metrohm Inline Sample Preparation – IC analyses as simple as possible (english)
    • Prospekt: Metrohm Inline-Probenvorbereitung – IC Analysen so einfach wie möglich (deutsch)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Metrosep A PCC 2 HC/4.0
    6.1006.340
    Metrosep A PCC 2 HC/4.0

    For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.

    1 piece(s)

  • Metrosep A Trap 1 - 100/4.0
    6.1014.000
    Metrosep A Trap 1 - 100/4.0

    High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0. Should these anionic contaminants elute at a later time, there will be practically no further noticeable influence on the baseline, due to the enormous peak widening.


    This column is primarily used with gradient applications.


    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    3 piece(s)

  • 
    Bottle attachment / GL 45 - 3 x UNF 10/32
    6.1602.150
    Bottle attachment / GL 45 - 3 x UNF 10/32

    For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.


    1 piece(s)

  • Bottle attachment GL 45 for eluents and reagents
    6.1602.160
    Bottle attachment GL 45 for eluents and reagents

    For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.

    2 piece(s)

  • Drying bottle / 100 mL / GL 45
    6.1608.050
    Drying bottle / 100 mL / GL 45

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    2 piece(s)

  • Adsorbing tube, large and bent
    6.1609.000
    Adsorbing tube, large and bent
    For filling with adsorber material.

    2 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    2 piece(s)

  • Adapter SGJ 14 for 6.1619.XXX Adsorber tube
    6.1624.000
    Adapter SGJ 14 for 6.1619.XXX Adsorber tube

    Adapter SGJ 14. Part of 6.1619.010 for Dilution Sample Processor.

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    2 piece(s)

  • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    6.1803.130
    Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    Connecting capillary from the eluent components to the Eluent Synthesizer

    1 piece(s)

  • 
            
    PTFE capillary 0.75 mm i.d. / 3 m
            
     
    6.1803.160
    PTFE capillary 0.75 mm i.d. / 3 m  


    PEEK capillary for use with adsorber module.


    4 piece(s)

  • FEP tubing / M6 / 9 cm
    6.1805.040
    FEP tubing / M6 / 9 cm
    With light and kink protection

    2 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    1 piece(s)

  • 
    T connector / M6 inner
    6.1808.060
    T connector / M6 inner

    3 M6 inner threads.


    1 piece(s)

  • 
            
    Adapter Dosino port 4, M6 inner
    6.1808.280
    Adapter Dosino port 4, M6 inner


    Adapter for use with Dosino port 4 in IC. For connecting to M6 connector.


    1 piece(s)

  • Silicone tubing 6 mm i.d. /  2 m
    6.1816.080
    Silicone tubing 6 mm i.d. /  2 m


    Drainage tubing to the "Waste Collector".


    2 piece(s)

  • PEEK sample loop 250 µL
    6.1825.290
    PEEK sample loop 250 µL

    Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.

    1 piece(s)

  • FEP aspiration tube M6, 0.5 m
    6.1829.020
    FEP aspiration tube M6, 0.5 m
    For Dosing Unit

    1 piece(s)

  • PEEK capillary 0.5 mm i.d., 15 cm
    6.1831.040
    PEEK capillary 0.5 mm i.d., 15 cm
    For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • 
    FEP tubing connection to Absorber Module, M6, 150 cm
    6.1838.020
    FEP tubing connection to Absorber Module, M6, 150 cm

    2 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    2 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • 
    Dosino holder for the Absorber Module
     
    6.2057.230
    Dosino holder for the Absorber Module  

    Holder for fastening Dosinos to the Absorber Module.


    2 piece(s)

  • Cable USB A - USB B  1.8 m
    6.2151.020
    Cable USB A - USB B 1.8 m
    USB connecting cable

    1 piece(s)

  • Colored sleeves for capillaries
    6.2251.000
    Colored sleeves for capillaries
    Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.

    1 piece(s)

  • 
    Absorber tube to the Absorber Module
    6.2421.000
    Absorber tube to the Absorber Module

    Absorber tube for the absorption of the combustion gases from the Combustion Module.


    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    3 piece(s)

  • Pressure screw 2x
    6.2744.014
    Pressure screw 2x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Pressure screw long
    6.2744.090
    Pressure screw long
    Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)

    4 piece(s)

  • Pressure screw PEEK UNF 1/4-28, 3 pieces
    6.2744.170
    Pressure screw PEEK UNF 1/4-28, 3 pieces
    Fixing connecting capillaries of the eluent components at the Eluent Synthesizer

    1 piece(s)

  • Adapter UNF 10/32 outer / M6 inner
    6.2744.200
    Adapter UNF 10/32 outer / M6 inner
    Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)

    1 piece(s)

  • Screw stopper 10/32 long
    6.2744.220
    Screw stopper 10/32 long
    For Professional IC Instruments. For sealing unused ports of degassers and MCS.

    8 piece(s)

  • 
    PEEK pressure screw 14 mm, 3 pcs.
    6.2744.350
    PEEK pressure screw 14 mm, 3 pcs.

    With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.


    2 piece(s)

  • 
    Holder for absorber tubing
    6.2766.000
    Holder for absorber tubing

    Holder for fastening the absorber tubing in the Absorber Module.


    1 piece(s)

  • 
    Holder for inlet valve
    6.2766.010
    Holder for inlet valve

    Holder for inlet valve to the Absorber Module.


    1 piece(s)

  • Inline filter 2 µm
    6.2821.120
    Inline filter 2 µm
    Inline filter 2 µm

    1 piece(s)

  • Inlet valve PEEK
    6.2824.170
    Inlet valve PEEK
    Metal-free check valve for the inletof IC pump heads

    1 piece(s)

  • MSM Rotor A
    6.2832.000
    MSM Rotor A
    Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)

    1 piece(s)

  • 
    Adapter sleeve for Suppressor Vario
    6.2842.020
    Adapter sleeve for Suppressor Vario

    The use of the adapter sleeve makes it possible to install both the Standard MSM and the MSM-LC rotor in the MSM-HC housing.


    1 piece(s)

  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • 
    Accessory kit: Vario/Flex Basic
    6.5000.000
    Accessory kit: Vario/Flex Basic

    Basic set of accessories for a Professional IC Vario or Compact IC Flex.


    1 piece(s)

  • 
    Accessory kit: Vario/Flex ONE
    6.5000.010
    Accessory kit: Vario/Flex ONE

    Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.


    1 piece(s)

  • 
    Accessory kit: Vario/Flex SeS
    6.5000.020
    Accessory kit: Vario/Flex SeS

    Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.


    1 piece(s)

  • MagIC Net 3.2 Compact CD: 1 license
    6.6059.321
    MagIC Net 3.2 Compact CD: 1 license

    Professional PC program for controlling one intelligent Compact IC instrument, one detector and one Autosampler, or one 771 Compact Interface. The software permits the inspection, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.

    Graphical user interface for routine operations, extensive database programs, method development, configuration and manual system control; very flexible user administration, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.

    MagIC Net Compact complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.

    MagIC Net is available in 16 dialog languages.

    1 license.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Piston seal
    6.2741.000
    Piston seal

    For all IC pumps. Particularly well-suited for eluents with organic solvents.

  • Combustion tube for Combustion IC
    6.7301.000
    Combustion tube for Combustion IC

    Quartz combustion tube for the Combustion Module.

  • Guide tubing for ABD
    6.7301.100
    Guide tubing for ABD

    Guide tubing for Automatic Boat Driver of the Combustion Module.


  • Hook for ABD
    6.7301.110
    Hook for ABD

    Quartz glass hook for quartz glass boat in the Automatic Boat Driver of the Combustion Module.


  • 
    Septum 12.5 mm
    6.7301.140
    Septum 12.5 mm

    Septum for liquid sample port, 5 pcs.


  • Substrate made of quartz for liquid samples 
    6.7301.150
    Substrate made of quartz for liquid samples 

    Substrate for liquid sample injections, 3 pcs.

  • 
    Manual dosing syringe 100 µL
    6.7301.160
    Manual dosing syringe 100 µL

    Manual dosing syringe for manual liquid sample injection


  • 
    O-ring 14 × 4 mm for ABD
    6.7301.170
    O-ring 14 × 4 mm for ABD

    Sealing ring for connection between ABD and quartz glass tubing


  • 
    Finger-Tight-Set 1/8 in.
    6.7301.180
    Finger-Tight-Set 1/8 in.

    Finger-Tight for gas connection on the Automatic Boat Driver


  • Sluice seal for ABD
    6.7301.190
    Sluice seal for ABD

    Seal for the sluice on the Automatic Boat Driver.


  • T connector CIC
    6.7301.210
    T connector CIC

    T connector after on the outlet of the oven for supplying absorption solution.


  • Spring wire clamp 7.3 - 7.8 mm
    6.7301.220
    Spring wire clamp 7.3 - 7.8 mm

    Spring wire clamp for Fast connector


  • 
    Non-return tubing Combustion IC
    6.7301.230
    Non-return tubing Combustion IC

    Non-return tubing for the protection of the gas box


  • 
    Threader 1/16 in. Tubing Combustion IC
    6.7301.240
    Threader 1/16 in. Tubing Combustion IC

    Threader for capillaries in the FAST connector


  • Flame sensor
    6.7301.250
    Flame sensor

    Flame sensor for fully automatic sample combustion


  • O-rings for CIC rinsing vessel
    6.7301.260
    O-rings for CIC rinsing vessel

    Replacement O-rings for the Combustion IC rinsing vessel, 3 pcs.

  • 
    Kit for solid samples for MMS 5000, 35 positions
    6.7302.000
    Kit for solid samples for MMS 5000, 35 positions

    Kit for solid samples for MMS 5000 with rack for sample boats, grippers and 10 quartz glass boats.


  • 
    Quartz boat 40 x 9 mm
    6.7302.100
    Quartz boat 40 x 9 mm

    Quartz glass boat for sample injection in Combustion Module, 10 pcs.


  • Quartz vial, 6 x 18 mm, for CIC, 50 pcs.
    6.7302.110
    Quartz vial, 6 x 18 mm, for CIC, 50 pcs.

    Sample vials made of quartz for Combustion IC. The sample vials are used when the sample contains alkali and/or alkaline earth cations which could affect the quartz combustion tube. These cations reaction with the quartz in the sample vial and are thus kept away from the combustion tube. Quartz wool (6.7302.120) is used to fix the samples in place in the sample vials.

  • Quartz wool for 6.7302.110, 10 g
    6.7302.120
    Quartz wool for 6.7302.110, 10 g

    Quartz wool for fixing the sample in place in the sample vial made of quartz (6.7302.110).

  • Ceramic boat 40 x 9 mm
    6.7302.130
    Ceramic boat 40 x 9 mm

    Ceramic boat for sample injection in Combustion Module, 10 pcs.

  • Gripper for boat
    6.7302.200
    Gripper for boat

    Gripper for solid changer setup MMS 5000


  • 
    Kit for liquid samples for MMS 5000, 112 positions
    6.7303.000
    Kit for liquid samples for MMS 5000, 112 positions

    Kit for liquid samples for MMS 5000 with rack for sample vessels, 100 µL syringe with replaceable needle and 100 snap-ring bottles.


  • 
    Snap-ring bottle ND11, 1.5 mL
    6.7303.100
    Snap-ring bottle ND11, 1.5 mL

    For liquid holder with MMS 5000, 100 pcs.


  • 
    Septum cap ND11
    6.7303.110
    Septum cap ND11

    For liquid holder with MMS 5000, 100 pcs.


  • 
    50 µL syringe with replaceable needle
    6.7303.200
    50 µL syringe with replaceable needle

    Replacement syringe for MMS 5000 liquid setup


  • 
    100 µL syringe with replaceable needle
    6.7303.210
    100 µL syringe with replaceable needle

    Replacement syringe for MMS 5000 liquid setup


  • Needles for 50 µL/100 µL syringes, 3 pcs.
    6.7303.220
    Needles for 50 µL/100 µL syringes, 3 pcs.

    Replacement needle for syringe for MMS 5000 liquid setup

  • Septum for rinsing vessel
    6.7303.240
    Septum for rinsing vessel

    Septum for rinsing vessel in the liquids kit for MMS 5000


  • Septum to waste vessel
    6.7303.250
    Septum to waste vessel

    Septum to waste vessel in the MMS 5000 (2.136.0800).


  • FAST connector, angled
    6.7304.000
    FAST connector, angled

    For connections with the quartz glass tubing


  • FAST connector, straight
    6.7304.010
    FAST connector, straight

    For connections with the quartz glass tubing


  • Oxygen/argon connection tubing, 2 m
    6.7304.020
    Oxygen/argon connection tubing, 2 m

    Connection tubing for gas supply for the Combustion Module


  • Oven coupling for LPG/GSS
    6.7304.030
    Oven coupling for LPG/GSS

    Connector for connecting the LPG/GSS module to the combustion oven. For Metrohm Combustion IC.


  • Blower vessel
    6.7305.000
    Blower vessel

    Blower vessel for LPG/GSS Module.

  • Screw connector, complete, for blower vessel.
    6.7305.010
    Screw connector, complete, for blower vessel.

    Screw connector for fastening to the blower vessel.

  • Septum perforated for PEEK gas inlet tube
    6.7305.020
    Septum perforated for PEEK gas inlet tube

    Septum perforated for transfer of the measuring gas via ABD lock.

  • PEEK gas inlet tube for GSS/LPG
    6.7305.030
    PEEK gas inlet tube for GSS/LPG

    Flexible tube made of PEEK guided through 6.730.5020 perforated septum.

  • 0.5 µm filter for LPG filter unit
    6.7305.040
    0.5 µm filter for LPG filter unit

    0.5 µm particle filter on the LPG connector.

  • T-connector to LPG/GSS Module
    6.7305.050
    T-connector to LPG/GSS Module

    T-connector with two 6/4 mm, 10 cm and 70 cm connection tubings

  • 40 µm filter for GSS filter unit
    6.7305.060
    40 µm filter for GSS filter unit

    40 µm particle filter for the GSS Module