Fully automated determination of the permanganate index in accordance with DIN EN ISO 8467

Fully automated determination of the permanganate index in accordance with DIN EN ISO 8467
Order number: MATi 13

Automated system for the determination of the permanganate index in accordance with DIN EN ISO 8467. Up to 24 samples can be placed on the rack and processed within one series. The sample is pipetted from the sample beaker into the external titration cell and analyzed completely automatically in accordance with the requirements of the DIN standard. After the titration, the external cell is cleaned thoroughly using the membrane pumps built into the sample changer. The system is controlled by the tiamo™ titration software.

The thermostat for heating the external titration vessel must be ordered separately.

  • Documents
  • Included parts
  • Brochure: Permanganate index - an important parameter in drinking water analysis   (english)
    • Prospekt: Permanganatindex – ein wichtiger Parameter in der Trinkwasseranalytik   (deutsch)
    • Folleto: Índice de permanganato: un parámetro importante en el análisis del agua potable   (español)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    3 piece(s)

  • 
    801 Stirrer
    2.801.0010
    801 Stirrer

    Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).


    1 piece(s)

  • 814 USB Sample Processor (1T/2P)
    2.814.0020
    814 USB Sample Processor (1T/2P)

    USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

     

    1 piece(s)

  • 854 iConnect
    2.854.0010
    854 iConnect

    854 iConnect - electrode cable and measuring amplifier for intelligent electrodes «iTrodes».

    1 piece(s)

  • 907 Titrando
    2.907.0010
    907 Titrando

    High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and Dosino dosing units.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • "iTrode" intelligent electrodes
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • iPt Titrode
    6.0471.300
    iPt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

    1 piece(s)

  • Pt1000 temperature sensor (installation length 12.5 cm)
    6.1110.100
    Pt1000 temperature sensor (installation length 12.5 cm)

    Pt1000 temperature sensor (class B) made of glass.

    1 piece(s)

  • Micro titration vessel lid ECO
    6.1414.060
    Micro titration vessel lid ECO

    1 piece(s)

  • Titration vessel with thermostat jacket  / 20-90 mL
    6.1418.220
    Titration vessel with thermostat jacket / 20-90 mL

    1 piece(s)

  • Sample beaker, clear glass, 75 mL, 1 piece 
    6.1432.210
    Sample beaker, clear glass, 75 mL, 1 piece 

    Sample beaker, clear glass, 75 mL, suitable for sample racks 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece
     

    30 piece(s)

  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes

    1 piece(s)

  • 3-way stopper with antidiffusion valve
    6.1543.210
    3-way stopper with antidiffusion valve
    Stopper with three buret tips for connecting 3 x M6 tubing

    1 piece(s)

  • FEP tubing / M6 / 60 cm
    6.1805.060
    FEP tubing / M6 / 60 cm
    With light and kink protection

    3 piece(s)

  • FEP tubing / M6 / 120 cm
    6.1805.130
    FEP tubing / M6 / 120 cm
    With light and kink protection

    2 piece(s)

  • Thread adapter M6 outer / M8 inner
    6.1808.040
    Thread adapter M6 outer / M8 inner
    Outer thread M6, inner thread M8.

    1 piece(s)

  • Aspiration tip with M10 screw nipple
    6.1821.070
    Aspiration tip with M10 screw nipple

    For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.

    1 piece(s)

  • Support stand for Sample Processors
    6.2001.070
    Support stand for Sample Processors
    Support stand for Sample Processors, for external titrations and dilutions (IC)

    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    2 piece(s)

  • Foil holder
    6.2037.040
    Foil holder
    Foil holder for 75 mL sample beaker for Karl Fischer for KF Sample Changer

    30 piece(s)

  • Sample rack 24 x 75 mL
    6.2041.340
    Sample rack 24 x 75 mL
    Sample rack for 24 x 75 mL samples, one-row.

    1 piece(s)

  • Bottle holder for Dosinos
    6.2061.010
    Bottle holder for Dosinos
    Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.

    1 piece(s)

  • Electrode cable 1 m, 2xB
    6.2104.080
    Electrode cable 1 m, 2xB
    With banana plug 4 mm dia. For connecting electrodes with Metrohm plug-in head G to measuring instrument.

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Stopper
    6.2730.030
    Stopper

    Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.

    5 piece(s)

  • Screw nipple
    6.2730.060
    Screw nipple
    PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment

    3 piece(s)

  • Al foil
    6.2820.000
    Al foil
    1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    2 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)

  • Holder for transfer tubing, 25 mL
    6.9915.078
    Holder for transfer tubing, 25 mL

    The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.

    1 piece(s)

  • Transfer tubing 25 mL
    6.9915.079
    Transfer tubing 25 mL

    The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder

    1 piece(s)