Plug and Analyze Series: single-parameter online analyzers

The Alert online Process Analysers come complete, preconfigured, and programmed for their specific applications.

Simply connect the power, sample, and reagent lines and the units are up and running producing reliable results. The analysers can be used for a variety of ions and metals, such as silica, phosphate, ammonia, nitrate, zinc, and copper, to name but a few.

Key features

  • Preconfigured, programmed, and calibrated for their specific applications
  •  
  • Automatic validation of the measurement
  •  
  • Large measuring and calibrated ranges
  •  
  • Low reagent usage
  •  
  • External interface for sample preconditioning and plant connectivity
  •  

Low running costs

The Alert analysers are easy to maintain because of the robust measuring techniques applied and hardware devices used.

Reagent usage is low, with typically less than 2.5 litres per month at 100 analyses per day.

A watchful eye on your water quality

Powerful conditional actions can be performed in the case of unusual analysis results or errors.

No value, loss of sample, out of limit or range, or unstable values are some examples of situations which can be used to prompt diagnostic alarms and additional cleaning, calibration, and standard cycles.

ICON Analyzer: high sensitivity and interference-free

Using an innovative Differential Absorbance Colorimetry (DAC) technique, the analyser eliminates the effect of sample colour, turbidity, and cell fouling from all measurements – which is a common failure with most colorimetric instruments, causing erroneous results.

The wide range of LED sources and filters available provides supreme sensitivity and accuracy even in low sample concentrations over a wide range of applications. Built-in validation and diagnostics tools produce reliable results you can depend on.

Alert Ion Analyser with validated results

The single-parameter Ion Analyser uses the unique Dynamic Standard Addition (DSA) technique to enhance the accuracy of ion-selective measurements.

Each analysis is validated against a known volume of standard solution based on an initial reading of the ISE and is unaffected by other compounds in the sample.

Sample temperature changes that commonly cause electrode drift are automatically compensated for to assure reliable results for continuous monitoring.