"ProfIC Vario 9 AnCat" – Professional IC Vario system with Metrohm's intelligent preconcentration technique and Inline Matrix Elimination (MiPCT-ME)

"ProfIC Vario 9 AnCat" – Professional IC Vario system with Metrohm's intelligent preconcentration technique and Inline Matrix Elimination (MiPCT-ME)
Order number: ProfIC Vario 9 AnCat

The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination, sequential suppression and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of anions and cations in complex matrices.

Typical areas of application:

  • Ultratrace analysis in samples from nuclear power plants and conventional power plants
  • Trace and ultratrace analysis in extraction agents and organics

 

Schematic representation

Installation instructions

  • Tech specs
  • Documents
  • Included parts
  • Opt. equipment

Parts
1 x 2.940.2500 940 Professional IC Vario TWO/SeS/PP
2 x 2.850.9010 IC Conductivity Detectors
1 x 2.815.0130 815 USB Sample Processor (2T/0P)
3 x 2.800.0010 800 Dosino
1 x 6.5330.160 IC equipment: MiPCT-ME
2 x 6.1014.200 Metrosep I Trap 1 - 100/4.0
, and additional parts for the Sample Processor

  • Automation in ion chromatography – Save time and money through fully automated sample preparation and analysis (english)
    • Automation in der Ionenchromatographie – Zeit und Kosten sparen durch voll automatische Probenvorbereitung und Analyse (deutsch)
  • Brochure: Metrohm Inline Sample Preparation – IC analyses as simple as possible (english)
    • Prospekt: Metrohm Inline-Probenvorbereitung – IC Analysen so einfach wie möglich (deutsch)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    2 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    3 piece(s)

  • 815 Robotic USB Sample Processor XL (2T/0P)
    2.815.0130
    815 Robotic USB Sample Processor XL (2T/0P)

    Robotic USB Sample Processor XL for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to four pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

     

    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    2 piece(s)

  • 940 Professional IC Vario TWO/SeS/PP
    2.940.2500
    940 Professional IC Vario TWO/SeS/PP

    The 940 Professional IC Vario TWO/SeS/PP is the intelligent two-channel IC instrument with sequential suppression (one channel) and a peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection methods.

    Typical areas of application:

    • Standard instrument for parallel anion and cation determinations
    • Trace analysis for anions and cations
    • Online monitoring for anions and cations

     

    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    2 piece(s)

  • Robotic arm with transfer head for 786 Swing Head, left swinging
    6.1462.030
    Robotic arm with transfer head for 786 Swing Head, left swinging
    Transfer robotic arm for liquid handling purposes

    1 piece(s)

  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes

    1 piece(s)

  • Bottle attachment GL 45 for eluents and reagents
    6.1602.160
    Bottle attachment GL 45 for eluents and reagents

    For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    1 piece(s)

  • Adapter SGJ 14 for 6.1619.XXX Adsorber tube
    6.1624.000
    Adapter SGJ 14 for 6.1619.XXX Adsorber tube

    Adapter SGJ 14. Part of 6.1619.010 for Dilution Sample Processor.

    1 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    1 piece(s)

  • 
    FEP aspiration tubing to canister
    6.1819.110
    FEP aspiration tubing to canister

    Aspiration tubing to canister attachment with M6 connector. For the production of eluents.


    1 piece(s)

  • Transfer tubing PFA, 20 mL
    6.1825.280
    Transfer tubing PFA, 20 mL

    1 piece(s)

  • PEEK Capillary 0.5 mm i.d., 3 m
    6.1831.180
    PEEK Capillary 0.5 mm i.d., 3 m

    1 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • Beaker retainer for Advanced IC Sample Processor
    6.2064.000
    Beaker retainer for Advanced IC Sample Processor
    Retaining plate for 838 Advanced Sample Processors. For holding 2.5 or 11 mL vials.

    1 piece(s)

  • Beaker retainer for Professional IC Sample Processor, right
    6.2064.010
    Beaker retainer for Professional IC Sample Processor, right
    Retaining plate for Professional IC Sample Processors. For holding 2.5 or 11 mL vials.

    1 piece(s)

  • Screw nut to needle holder IC
    6.2629.000
    Screw nut to needle holder IC
    On Sample Processors

    2 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Needle/tube holder 1/8 in.
    6.2833.000
    Needle/tube holder 1/8 in.
    For IC/VA Sample Processors. For 1/8 in. tubes

    2 piece(s)

  • 
    Liquid Handling Station, right
    6.2841.130
    Liquid Handling Station, right

    Combined rinsing and dilution station for sample changers with two towers and Swing Head. For assembly to the left of the tower.


    1 piece(s)

  • 
    Sample needle made of zirconium oxide with PEEK tip
    6.2846.010
    Sample needle made of zirconium oxide with PEEK tip

    Sample needle for Sample Processors and Autosampler in ion chromatography. The PEEK tip guarantees secure piercing of the vial covering.


    2 piece(s)

  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • 
    IC equipment: MiPCT-ME
    6.5330.160
    IC equipment: MiPCT-ME

    Accessory set for assembling a Dosino for Metrohm intelligent Preconcentration Technique with Matrix Elimination (MiPCT-ME).


    1 piece(s)

  • 
    Safety shield for IC, right and left
    6.9927.028
    Safety shield for IC, right and left

    Safety shield for 815 Robotic USB Sample Processor XL (2T/0P). Is utilized in IC when sample needles are used.


    2 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 941 Eluent Production Module
    2.941.0010
    941 Eluent Production Module

    The 941 Eluent Production Module enables the automatic production of an eluent. It enables continuous working without manual intervention and guarantees stable retention times. It can be combined with all Metrohm IC instruments and is monitored by MagIC Net.

  • 
    Metrosep C PCC 1 HC/4.0
    6.1010.310
    Metrosep C PCC 1 HC/4.0
    For cation preconcentration and matrix elimination
  • Metrosep C 4 - 150/4.0
    6.1050.420
    Metrosep C 4 - 150/4.0

    The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.

  • Metrosep C 4 Guard/4.0
    6.1050.500
    Metrosep C 4 Guard/4.0


    The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contaminations are reliably retained, allowing the lifetime of the analytical separation column to be prolonged considerably. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also functions according to the "On Column Guard System" and is screwed directly onto the separation column with nearly no dead volume.


  • PE bottle 50 mL
    6.1608.100
    PE bottle 50 mL

    Bottle for Extension Module Liquid Handling.


  • Piston seal
    6.2741.000
    Piston seal

    For all IC pumps. Particularly well-suited for eluents with organic solvents.

  • 
    EMPTY sensor for level sensor for 2 L bottles
    6.2769.110
    EMPTY sensor for level sensor for 2 L bottles

    This sensor, mounted in the 6.1626.000 bottle attachment, results in the level sensor EMPTY for 2 L bottles. Included are two sensor rods, one aspiration tubing and two holders for fixing the tubing to one of the sensor rods.


  • Al foil
    6.2820.000
    Al foil
    1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
  • MSM Rotor A
    6.2832.000
    MSM Rotor A
    Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
  • MSM-HC Rotor A
    6.2842.000
    MSM-HC Rotor A
    Suppressor rotor for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity)
  • 
    Adapter sleeve for Suppressor Vario
    6.2842.020
    Adapter sleeve for Suppressor Vario

    The use of the adapter sleeve makes it possible to install both the Standard MSM and the MSM-LC rotor in the MSM-HC housing.


  • MSM-LC Rotor A
    6.2844.000
    MSM-LC Rotor A
    Suppressor rotor for use with 2 mm columns.
  • 
    IC equipment: Additional eluent on the Eluent Production Module
    6.5330.090
    IC equipment: Additional eluent on the Eluent Production Module

    Accessory set for Eluent Production Module. Contains all parts necessary for expansion by one eluent. The level sensor must be ordered in accordance with the application.


  • MagIC Net 3.2 Professional CD: 1 license
    6.6059.322
    MagIC Net 3.2 Professional CD: 1 license

    Professional PC program for controlling all of the intelligent Professional IC systems, Compact IC instruments and their peripherals, such as various Autosamplers, 800 Dosinos, 771 Compact Interface, etc. The software permits the inspection, data acquisition, data evaluation, data monitoring and report generation of ion chromatographic analyses.

    Graphical user interface for routine operations, extensive database programs, method development, configuration and manual system control; very flexible user administration, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.

    MagIC Net Professional complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.

    MagIC Net is available in 16 dialog languages.

    1 license.

  • MagIC Net 3.2 Multi CD: 3 licenses
    6.6059.323
    MagIC Net 3.2 Multi CD: 3 licenses

    Professional PC program for controlling all of the intelligent Professional IC systems, Compact IC instruments and their peripherals, such as various Autosamplers, 800 Dosinos, 771 Compact Interface, etc. The software permits the inspection, data acquisition, data evaluation, data monitoring and report generation of ion chromatographic analyses.

    Graphical user interface for routine operations, extensive database programs, method development, configuration and manual system control; very flexible user administration, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.

    MagIC Net Multi complies fully with FDA Regulation 21 CFR Part 11 as well as with GLP.

    MagIC Net is available in 16 dialog languages.

    Client/server version with 3 licenses.

  • 6.9920.191
    Sample rack 3 x 60.6 mm and 35 x 41 mm

    Sample rack for trace analysis in IC.