20 A current booster

20 A current booster
Order number: Booster20A

The Booster20A module increases the maximum current of the PGSTAT302N to 20 Ampere. The compliance voltage of the system is 20 V in combination with the Booster20A.

With its fast response time, the Autolab Booster20A has been optimized to perform electrochemical impedance measurements, in combination with the FRA32M module, on fuel cells, batteries and super-capacitors. The booster is able to handle active as well as passive cells. The Booster20A can be used to measure the charge and discharge characteristics of super-capacitors, perform measurements on fuel cells or perform DC or AC measurements on large area electrodes.

  • Tech specs
  • Included parts
Compliance voltage range in volt 20
Maximum bandwidth in Hz 20 k
Maximum current in ampère 20
Maximum power in watt 350
Potential range in volt 10

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • BST.DUMCELL50
    Booster20A Dummy cell
    BST.DUMCELL50

    50 mOhm dummy cell for testing the Booster20A.

    1 piece(s)

  • Booster digital interface cable
    BST.DIO.CABLE
    Booster digital interface cable

    Digital control cable for the Autolab Booster10A and Booster20A.

    1 piece(s)

  • Booster emergency stop button
    BST.EMER.BUTN
    Booster emergency stop button

    The Booster20A is fitted with an emergency stop button which can be position in close proximity to the instrument. This button can be used to immediatly disconnect the Booster20A from the cell if necessary.

    1 piece(s)

  • Power cable
    CABLE.PWR
    Power cable

    Standard power cable for Autolab instruments and accessories.

    1 piece(s)