tiamo

tiamo logo

Aktuelle Version: tiamoTM 2.5

tiamoTM ist eine Steuerungs- und Datenbanksoftware für Titratoren, Dosiergeräte und Probenwechsler, die eine komplette Laborautomatisierung ermöglicht. Der Name tiamo steht für "titration and more" denn tiamoTM kann weit mehr als nur titrieren.

> Erfahren Sie mehr über die verschiedenen tiamoTM Versionen und zusätzliche Lizensen.

> FAQ über tiamoTM

> tiamoTM Grundlagen

Downloads

Wichtige Hinweise

Führen Sie niemals ein Upgrade von tiamo 1.x zu tiamo 2.x ohne einen gültigen Lizenzcode für tiamo 2.x aus! Ohne einen gültigen Lizenzcode bekommsen Sie nur eine Demo-Version, die nach 30 Tagen abläuft. Ein Downgrade von tiamo 2.X zurück zu tiamo 1.X ist NICHT möglich!

Um einen gültigen Tiamo 2.X Lizenzcode zu erhalten, wenden Sie sich bitte an Ihre lokale Metrohm Vertretung.

Wenn Sie das chinesische oder traditionelle chinesische Sprachupdate installieren, stellen Sie bitte sicher, dass die jeweilige Zeichenunterstützung in den Spracheinstellungen Ihres PCs aktiviert ist.

Zu den tiamo Versionen:

tiamoTM 2.5, tiamoTM 2.4tiamoTM 2.3tiamoTM 2.2tiamoTM 2.1tiamoTM 2.0

tiamoTM 1.3tiamoTM 1.2.1tiamoTM 1.2tiamoTM 1.1tiamoTM 1.0


tiamo 2.5

Download: tiamoTM 2.5 Version mit den neuesten Upgrades:

> Download tiamoTM 2.5

> Patch for tiamoTM 2.5

Die Hauptverbesserung mit diesem Patch ist:

Konfigurationsprogrammteil

Wenn in tiamo 2.5 light die Checkbox Anmeldenamen erforderlich unter Sicherheitseinstellungen – Anmeldung/Passwortschutz aktiv war und die OK-Taste gedrückt wurde, stürzte das Programm ab.

Folgende zusätzliche Dialogsprachen können für tiamoTM 2.5 herunterladen

Downloads

tiamo 2.4

Download the tiamoTM 2.4 version with the newest upgrades here:

> Download tiamoTM 2.4

The following additional dialog languages can be downloaded for tiamoTM 2.4:

Downloads

tiamo 2.3

Download the tiamoTM 2.3 version with the newest upgrades here:

> Download tiamoTM 2.3

> Patch 1 for tiamoTM 2.3

The main improvement with this patch is:

Program part Configuration
  • the limitation to two devices applies only for Metrohm devices (Titrino, Titrando, etc.); that means that balances and other generic (i.e. non-Metrohm) devices can be included without limitation.

The following additional dialog languages can be downloaded for tiamoTM 2.3:

Downloads

tiamo 2.2

Download the tiamoTM 2.2 version with the newest upgrades here:

> Download tiamoTM 2.2

> Patch 1 for tiamoTM 2.2

This patch eliminates the following bugs:
  • In the dialog window Reprocessing on the tab Statistics, the table is not being shown.
  • If the monitoring of the titer validity, the common variable, the global variable or the calibration data has expired, it is not possible to newly determine the titer, the common variable or the global variable via the CALC command ("Save result as...") or to carry out a calibration.
  • The program crashes when running MET determinations with Titrinos.
  • If the beaker test is enabled and the action "Stop determination and series" is selected in the MOVE command for the beaker test, then the error track will not being run through when a beaker is missing

The following additional dialog languages can be downloaded for tiamoTM 2.2:

Downloads

tiamo 2.1

Download the tiamoTM 2.1 version with the newest upgrades here:

> Download tiamoTM 2.1

The following additional dialog languages can be downloaded for tiamoTM 2.1:

Downloads

tiamo 2.0

Download the tiamoTM 2.0 version with the newest upgrades here:

> Download tiamoTM 2.0

> Patch 1 for tiamoTM 2.0

This patch eliminates the following bugs:

  • when doing a SET, KFT or KFC with deactivated 'Automatic conditioning' a start drift of 0.0 was taken
  • when doing an upgrade from tiamo 1.3 to 2.0 the BackupServer.exe wasn't replaced
  • the remote interface for the devices 778, 789, 888 and 890 didn't work or wasn't available, at all
  • the evaluation with window didn't work with Titrinos
  • when switching of the reference temperature for MEAS Cond an exception occured

The following additional dialog languages can be downloaded for tiamoTM 2.0:

Downloads

tiamo 1.3

Download the tiamoTM 1.3 version with the newest upgrades here:

> Download tiamoTM 1.3

The following additional dialog languages can be downloaded for tiamoTM 1.3:

Downloads

tiamo 1.2.1

Download the tiamoTM 1.2.1 version with the newest upgrades here:

> Download tiamoTM 1.2.1

The following additional dialog languages can be downloaded for tiamoTM 1.2.1:


tiamo 1.2

Download the tiamoTM 1.2 version with the newest upgrades here:

> Download tiamoTM 1.2

> Patch 1 for tiamoTM 1.2

> Patch 2 for tiamoTM 1.2

Patch 1 eliminates the following bug in tiamoTM 1.2:

  • When a method is started, which utilisizes the diff-measuring input, then misleadingly the following message appears:
    "Wrong measuring input (011-122)."
    The text is for example like:
    "The non-intelligent sensor 'pH Electrode' demanded by the command 'MEAS pH' can't be connected to the measuring input 3 at device ''702_1'. Choose a different sensor or a different measuring input."

Patch 2 eliminates the following bugs in tiamoTM 1.2:

  • While manual actions in one device (manual control or while method run) it may happen, that the reservation of the device isn't enabled in a correct way.
  • Additionally, this Patch 2 includes Patch 1 (cummulative Patch).

tiamo 1.1

Download the tiamoTM 1.1 version with the newest upgrades here:

> Download tiamoTM 1.1

> Progress Bar Patch

> Timer Patch


tiamo 1.0

Download the tiamoTM 1.0 version with the newest upgrades here:

> Download tiamoTM 1.0