Fully automatic measurement of waters with low conductivity in accordance with USP 645

Fully automatic measurement of waters with low conductivity in accordance with USP 645
Katalogové číslo: MATi 14

Automated system for the determination of conductivity in sterile waters in accordance with USP 645. Up to 28 samples can be placed on the rack and processed within one series. The sample is transferred from the sample beaker into the external titration cell and analyzed completely automatically in accordance with the 3-stage USP Standard procedure. The system is controlled by the tiamo™ titration software.

The thermostat for controlling the temperature of the external titration vessel must be ordered separately.

  • Součástky

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    2 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    2 piece(s)

  • 802 Stirrer (propeller stirrer) for 804 Ti Stand
    2.802.0040
    802 Stirrer (propeller stirrer) for 804 Ti Stand
    Rod stirrer with 6.1909.010 Propeller stirrer.

    1 piece(s)

  • 815 Robotic USB Sample Processor XL (2T/0P)
    2.815.0130
    815 Robotic USB Sample Processor XL (2T/0P)

    Robotic USB Sample Processor XL for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to four pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

     

    1 piece(s)

  • 823 Membrane Pump Unit «aspirate»
    2.823.0020
    823 Membrane Pump Unit «aspirate»

    Membrane pump for direct connection to Sample Processors. The «Aspiration» version contains numerous accessories for aspirating off solutions.

    1 piece(s)

  • 856 Conductivity Module
    2.856.0010
    856 Conductivity Module

    Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
    Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

    The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
    Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.

    1 piece(s)

  • 867 pH Module
    2.867.0010
    867 pH Module

    Module for pH/ion measurement as supplement to a Titrando or "stand-alone" in combination with a 900 Touch Control.

    In addition to measurements of pH, temperature, mV, Ipol, Upol and concentration, the pH Module can perform standard additions (manual, dos, autodos) and Liquid Handling (add, prep, empty). It enables the use of both conventional and intelligent sensors for measuring. Also integrated in the software is an automatic GLP-compliant pH electrode test.

    The pH Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos (for the addition of auxiliary solutions or for standard addition).
    Both in conjunction with the Touch Control and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.

    1 piece(s)

  • Aquatrode plus with Pt1000
    6.0257.600
    Aquatrode plus with Pt1000

    Combined pH electrode with integrated Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.

    1 piece(s)

  • Conductivity measuring cell c = 0.1 cm-1 with Pt1000 (fixed cable)
    6.0916.040
    Conductivity measuring cell c = 0.1 cm-1 with Pt1000 (fixed cable)

    Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1, with integrated Pt1000 temperature sensor and fixed cable (1.2 m) for connecting to an 856 Conductivity Module.
    This sensor is suitable for measurements of low conductivities (0 uS/cm to 300 uS/cm) in e.g., deion. water or for measurements in accordance with USP <645>.

    1 piece(s)

  • Titration vessel with thermostat jacket / 50-150 mL
    6.1418.250
    Titration vessel with thermostat jacket / 50-150 mL

    1 piece(s)

  • Sample beaker, clear glass, 250 mL, 1 piece 
    6.1432.320
    Sample beaker, clear glass, 250 mL, 1 piece 

    Sample beaker, clear glass, 250 mL, suitable for sample racks 6.2041.310, 6.2041.400, 6.2041.430, 6.2041.510, 6.2041.820, 6.2068.020 and 6.2068.030, 1 piece
     

    28 piece(s)

  • Titration Head, 3 x SGJ 14
    6.1458.040
    Titration Head, 3 x SGJ 14
    Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.

    1 piece(s)

  • Robotic arm with holder for titration head, right swinging
    6.1462.070
    Robotic arm with holder for titration head, right swinging
    Titration head holder to 786 Swing Head

    1 piece(s)

  • Robotic arm with holder for titration head, left swinging, external
    6.1462.260
    Robotic arm with holder for titration head, left swinging, external
    Titration head holder for 786 Swing Head with possibility of swinging to external positions

    1 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    2 piece(s)

  • Stirring propeller / 96 mm
    6.1909.010
    Stirring propeller / 96 mm
    Propeller stirrer, length from lower edge of SGJ: 96 mm. For use with beakers with 722, 802 Rod Stirrer

    1 piece(s)

  • Lid for 250 mL sample beaker
    6.2037.060
    Lid for 250 mL sample beaker
    Lid for 250 mL sample beakers for use with DIS-Cover system of the Sample Processor.

    28 piece(s)

  • Sample rack 28 x 250 mL
    6.2041.820
    Sample rack 28 x 250 mL
    Sample rack for 28 x 250 mL samples (6.1432.320), multi-row

    1 piece(s)

  • Fastening plate for deflector and holder for collection container
    6.2058.050
    Fastening plate for deflector and holder for collection container
    The fastening plate is mounted at the side of the Sample Processor tower and allows the mounting of a deflector for the automatic pulling off the used tools.

    1 piece(s)

  • Electrode cable for plug in head U/plug F, 2x2 mm B, 1m
    6.2104.600
    Electrode cable for plug in head U/plug F, 2x2 mm B, 1m
    For connecting electrodes with Metrohm plug-in head U to Metrohm instruments (socket F).

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    2 piece(s)

  • Buffer solution pH 4 (500 mL)
    6.2307.100
    Buffer solution pH 4 (500 mL)
    Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal

    1 piece(s)

  • Buffer solution pH 7 (500 mL)
    6.2307.110
    Buffer solution pH 7 (500 mL)
    Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal

    1 piece(s)

  • Conductivity standard 100 µS/cm 250 mL
    6.2324.010
    Conductivity standard 100 µS/cm 250 mL
    Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.

    1 piece(s)

  • pHit kit
    6.2325.000
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use

    1 piece(s)

  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Full CD: 1 license
    6.6056.252
    Tiamo 2.5 Full CD: 1 license

    Computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance report generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Czech, Japanese, Chinese and Traditional Chinese

     

    1 piece(s)