Automated titration system for up to 28 samples

Automated titration system for up to 28 samples
Katalogové číslo: MATi 07

Fully automated system for the performance of potentiometric titrations such as acid/base, Redox and classic halogenide titration in series of up to 28 samples. The system is controlled with the tiamo titration software. At the end of the determination, the electrode and buret tips are cleaned automatically using the Pump Station and the beaker is emptied.

The electrode must be selected separately, depending on the application.

  • Součástky
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • 
    772 Pump Unit – aspirate
    2.772.0120
    772 Pump Unit – aspirate

    Peristaltic pump for direct connection to Sample Processors. The "Aspiration" version contains extensive accessories for the aspiration of titered-out solutions.


    1 piece(s)

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    1 piece(s)

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

    1 piece(s)

  • 815 Robotic USB Sample Processor XL (1T/1P)
    2.815.0010
    815 Robotic USB Sample Processor XL (1T/1P)

    Robotic USB Sample Processor XL with one workstation and one built-in membrane pump for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

    1 piece(s)

  • 905 Titrando
    2.905.0010
    905 Titrando

    High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • "iTrode" intelligent electrodes
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    6.1458.010
    Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    With 6xSGJ 14 and 3x SGJ 9 apertures.

    1 piece(s)

  • Sample beakers, disposable, plastic (PP), 200 mL, 1,000 pieces 
    6.1459.310
    Sample beakers, disposable, plastic (PP), 200 mL, 1,000 pieces 

    Sample beakers, disposable, plastic (polypropylene, PP), 200 mL, suitable for 6.02041.020 OMNIS sample rack, 6.2041.370 und 6.2041.830 sample racks, 1,000 pieces.

    1 piece(s)

  • Robotic arm with holder for titration head, left swinging
    6.1462.060
    Robotic arm with holder for titration head, left swinging
    Titration head holder to 786 Swing Head

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    1 piece(s)

  • Sample rack 28 x 200 mL
    6.2041.830
    Sample rack 28 x 200 mL
    Sample rack for 28 x 200 mL samples (6.1459.310), multi-row

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • iAquatrode plus with Pt1000
    6.0277.300
    iAquatrode plus with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

  • iUnitrode with Pt1000
    6.0278.300
    iUnitrode with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:

    • for pH measurements and titrations in difficult, viscous, or alkaline samples
    • at elevated temperatures
    • for long-term measurements

    The fixed ground-joint diaphragm is insensitive to contamination.

    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

  • iEcotrode plus
    6.0280.300
    iEcotrode plus

    Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations.

    The fixed ground-joint diaphragm is insensitive to contamination.
    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

  • iAg Titrode
    6.0470.300
    iAg Titrode

    Intelligent, combined silver ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

  • iPt Titrode
    6.0471.300
    iPt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

  • Buffer solution pH 4 (500 mL)
    6.2307.100
    Buffer solution pH 4 (500 mL)
    Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
  • Buffer solution pH 7 (500 mL)
    6.2307.110
    Buffer solution pH 7 (500 mL)
    Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
  • Buffer solution pH 9 (500 mL)
    6.2307.120
    Buffer solution pH 9 (500 mL)
    Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal
  • pHit kit
    6.2325.000
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use