888 Titrando with Touch Control

888 Titrando with Touch Control
Katalogové číslo: 2.888.0110

High-end titrator with built-in buret drive

  • including 900 Touch Control, 801 Stirrer magnetic stirrer, exchange unit (20 mL) and combined "Ecotrode plus" pH glass electrode
  • dynamic (DET), monotonic (MET) and endpoint titration (SET)
  • four MSB connectors
  • one galvanically isolated measuring interface (also for intelligent "iTrodes" electrodes)
  • USB connector
  • Dokumenty
  • Součástky
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Ecotrode Plus
    6.0262.100
    Ecotrode Plus

    Combined pH electrode for aqueous acid/base titration. The fixed ground-joint diaphragm is insensitive to contamination. Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.

    1 piece(s)

  • Stirring bar / 16 mm
    6.1903.020
    Stirring bar / 16 mm
    Stirring Bar with magnetic core, PTFE coated, length 16 mm

    1 piece(s)

  • Stirring bar / 25 mm
    6.1903.030
    Stirring bar / 25 mm

    Stirring bar with magnetic core, PTFE covering, length 25 mm.


    1 piece(s)

  • Support stand without support rod
    6.2001.060
    Support stand without support rod
    To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.

    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    1 piece(s)

  • Support rod / 400 mm
    6.2016.070
    Support rod / 400 mm

    1 piece(s)

  • Electrode holder
    6.2021.020
    Electrode holder
    Electrode holder for 4 electrodes and 2 buret tips

    1 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2 mm
    6.2621.130
    Hexagon key 2 mm
    2 mm.

    1 piece(s)

  • Wrench
    6.2739.010
    Wrench
    For exchange units.

    1 piece(s)

  • Exchange Unit 20 mL
    6.3026.220
    Exchange Unit 20 mL
    Exchange unit with integrated data chip with 20 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.

    1 piece(s)

  • USB Memory Stick for 900 Touch Control 
    6.6064.010
    USB Memory Stick for 900 Touch Control 

    1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • USB thermal printer Neo's
    2.141.0100
    USB thermal printer Neo's

    Compact printer with USB interface for the Ti-Touch, the Titrino plus and Dosimat plus and the 91X Meter instruments.

    Paper width 60 mm (40 characters). Including 6.2151.120 USB cable.

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

  • 802 Stirrer (propeller stirrer) for 804 Ti Stand
    2.802.0040
    802 Stirrer (propeller stirrer) for 804 Ti Stand
    Rod stirrer with 6.1909.010 Propeller stirrer.
  • 804 Ti Stand with stand
    2.804.0040
    804 Ti Stand with stand
    Titration stand and controller for 802 Rod Stirrer. The 804 Ti Stand together with the optional 802 Rod Stirrer provides an alternative to the magnetic stirrer. Ti Stand with base plate, support rod and electrode holder.
  • 805 Dosimat
    2.805.0010
    805 Dosimat
    Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
  • 854 iConnect
    2.854.0010
    854 iConnect

    854 iConnect - electrode cable and measuring amplifier for intelligent electrodes «iTrodes».

  • iAquatrode plus with Pt1000
    6.0277.300
    iAquatrode plus with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

  • iUnitrode with Pt1000
    6.0278.300
    iUnitrode with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:

    • for pH measurements and titrations in difficult, viscous, or alkaline samples
    • at elevated temperatures
    • for long-term measurements

    The fixed ground-joint diaphragm is insensitive to contamination.

    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

  • iSolvotrode
    6.0279.300
    iSolvotrode

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data for all non-aqueous acid/base titrations.
    The glass membrane is optimized for poorly conducting solutions, and thanks to the flexible ground-joint diaphragm, the electrode is well suited for contaminated samples. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

  • iAg Titrode
    6.0470.300
    iAg Titrode

    Intelligent, combined silver ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

  • iPt Titrode
    6.0471.300
    iPt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

  • Electrode cable for plug in head U/plug F, 2x2 mm B, 1m
    6.2104.600
    Electrode cable for plug in head U/plug F, 2x2 mm B, 1m
    For connecting electrodes with Metrohm plug-in head U to Metrohm instruments (socket F).
  • Remote cable 869 Compact Sample Changer to Remote box MSB
    6.2141.320
    Remote cable 869 Compact Sample Changer to Remote box MSB
    Remote cable (9-pin) for the connection of a 869 Compact Sample Changer to (6.2148.010). Remote box MSB
  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • RS-232/USB box
    6.2148.020
    RS-232/USB box

    Extends the Titrando, USB Sample Processors, Dosing Interface, Titrosampler by two RS-232 interfaces for connecting e.g. balances, PC, LIMS. Requires 6.2151.030 cable.


  • Exchange Unit 1 mL
    6.3026.110
    Exchange Unit 1 mL
    Exchange Unit with integrated data chip with 1 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 5 mL
    6.3026.150
    Exchange Unit 5 mL
    Exchange Unit with integrated data chip with 5 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 10 mL
    6.3026.210
    Exchange Unit 10 mL
    Exchange unit with integrated data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange unit 50 mL
    6.3026.250
    Exchange unit 50 mL

    Exchange unit with integrated data chip with 50 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion tip and standard amber glass reagent bottle.


  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.