916 Ti-Touch with magnetic stirrer

916 Ti-Touch with magnetic stirrer
Katalogové číslo: 2.916.0020

''Reduce to the max'' – this is the 916 Ti-Touch concept. The compact titrator from Metrohm offers the maximum in the class of stand-alone systems for routine analysis.

The 916 Ti-Touch with built-in magnetic stirrer supports all potentiometric titrations: the titration modes DET (dynamic equivalence point titration), MET (monotonic equivalence point titration), SET (titration to one or two specified endpoints), STAT (enzymatic and pH-STAT titrations) and MAT (manual titration).

The 916 Ti-Touch now also fulfills FDA Regulation 21 CFR, Part 11. This means you are always on the safe side when it comes to audits.

  • Dokumenty
  • Součástky
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Stirring bar / 16 mm
    6.1903.020
    Stirring bar / 16 mm
    Stirring Bar with magnetic core, PTFE coated, length 16 mm

    1 piece(s)

  • Stirring bar / 25 mm
    6.1903.030
    Stirring bar / 25 mm

    Stirring bar with magnetic core, PTFE covering, length 25 mm.


    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    1 piece(s)

  • Support rod / 400 mm
    6.2016.070
    Support rod / 400 mm

    1 piece(s)

  • Electrode holder
    6.2021.020
    Electrode holder
    Electrode holder for 4 electrodes and 2 buret tips

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Power supply unit 100 - 240 V/24 V DC
    6.2164.010
    Power supply unit 100 - 240 V/24 V DC
    Power supply unit for 915 KF Ti-Touch and 916 Ti-Touch

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 
    Demo CD for tiBase 1.1
    6.6063.901
    Demo CD for tiBase 1.1

    Demo CD for tiBase. Test version for 30 days.


    1 piece(s)

  • USB flash drive for Ti-Touch
    6.6066.000
    USB flash drive for Ti-Touch
    USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.

    1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • USB thermal printer Neo's
    2.141.0100
    USB thermal printer Neo's

    Compact printer with USB interface for the Ti-Touch, the Titrino plus and Dosimat plus and the 91X Meter instruments.

    Paper width 60 mm (40 characters). Including 6.2151.120 USB cable.

  • 800 Dosino
    2.800.0020
    800 Dosino

    Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).

  • 801 Stirrer with stand
    2.801.0040
    801 Stirrer with stand

    Magnetic stirrer including base plate, support rod and electrode holder for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimat and 780/781 pH meters as well as the 856 and 867 measuring modules. With permanently attached cable for MSB (Metrohm Serial Bus).

  • 802 Stirrer (propeller stirrer) for 804 Ti Stand
    2.802.0040
    802 Stirrer (propeller stirrer) for 804 Ti Stand
    Rod stirrer with 6.1909.010 Propeller stirrer.
  • 804 Ti Stand with stand
    2.804.0040
    804 Ti Stand with stand
    Titration stand and controller for 802 Rod Stirrer. The 804 Ti Stand together with the optional 802 Rod Stirrer provides an alternative to the magnetic stirrer. Ti Stand with base plate, support rod and electrode holder.
  • 805 Dosimat
    2.805.0010
    805 Dosimat
    Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
  • 810 Sample Processor
    2.810.0010
    810 Sample Processor

    Sample Processor for the automated analysis of routine samples using 916 Ti-Touch or 915 KF Ti-Touch.

    Sample Processor with one workstation and one built-in membrane pump for the automatic processing of potentiometric as well as Karl Fischer titrations, in series with small to medium quantities. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.

     

  • 854 iConnect
    2.854.0010
    854 iConnect

    854 iConnect - electrode cable and measuring amplifier for intelligent electrodes «iTrodes».

  • iUnitrode with Pt1000
    6.0278.300
    iUnitrode with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:

    • for pH measurements and titrations in difficult, viscous, or alkaline samples
    • at elevated temperatures
    • for long-term measurements

    The fixed ground-joint diaphragm is insensitive to contamination.

    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

  • iSolvotrode
    6.0279.300
    iSolvotrode

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data for all non-aqueous acid/base titrations.
    The glass membrane is optimized for poorly conducting solutions, and thanks to the flexible ground-joint diaphragm, the electrode is well suited for contaminated samples. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

  • iEcotrode plus
    6.0280.300
    iEcotrode plus

    Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations.

    The fixed ground-joint diaphragm is insensitive to contamination.
    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

  • iAg Titrode
    6.0470.300
    iAg Titrode

    Intelligent, combined silver ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

  • iPt Titrode
    6.0471.300
    iPt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

  • Optrode
    6.1115.000
    Optrode

    Optical sensor for photometric titrations offering 8 different wavelengths.
    Switching of the wavelength can be done via software (tiamo 2.5 or higher) or with a magnet.
    The glass shaft is completely solvent-resistant and easy to clean.
    This space-saving sensor is suitable, e.g.:

    • for non-aqueous titrations in accordance with USP or EP
    • for determination of carboxyl end groups
    • for TAN/TBN in accordance with ASTM D974
    • for sulfate determination
    • Fe, Al, Ca in cement
    • water hardness
    • Chondroitin sulfate in accordance with USP
  • Bottle holder for Dosinos
    6.2061.010
    Bottle holder for Dosinos
    Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
  • Exchange Unit 1 mL
    6.3026.110
    Exchange Unit 1 mL
    Exchange Unit with integrated data chip with 1 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 5 mL
    6.3026.150
    Exchange Unit 5 mL
    Exchange Unit with integrated data chip with 5 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 10 mL
    6.3026.210
    Exchange Unit 10 mL
    Exchange unit with integrated data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 20 mL
    6.3026.220
    Exchange Unit 20 mL
    Exchange unit with integrated data chip with 20 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange unit 50 mL
    6.3026.250
    Exchange unit 50 mL

    Exchange unit with integrated data chip with 50 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion tip and standard amber glass reagent bottle.


  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.