Peristaltic (4-channel) pump module

Peristaltic (4-channel) pump module
Katalogové číslo: 2.1016.0110

Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.

  • Dokumenty
  • Součástky
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Silicone tubing 8/12 2.5 m
    6.01803.000
    Silicone tubing 8/12 2.5 m

    Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.

    1 piece(s)

  • Tubing adapter for drainage tubing
    6.01804.500
    Tubing adapter for drainage tubing

    Tubing adapter for drainage tubing on Pick&Place modules and pump modules in the OMNIS Sample Robot Pick&Place.

    1 piece(s)

  • FEP tubing connection / M6 / 66.5 cm
    6.01805.000
    FEP tubing connection / M6 / 66.5 cm

    With light protection and protection against kinks.

    6 piece(s)

  • PTFE tubing connection / M8 / 66.5 cm
    6.01805.010
    PTFE tubing connection / M8 / 66.5 cm

    With light protection and protection against kinks.

    2 piece(s)

  • "Peristaltic" (2-channel) pump module accessory set
    6.05001.010
    "Peristaltic" (2-channel) pump module accessory set

    The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.

    2 piece(s)

  • Aspiration tip / M8 thread
    6.1543.170
    Aspiration tip / M8 thread

    Aspiration tip for the Sample Processors.


    2 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    4 piece(s)

  • Cap for 10-L container
    6.1621.100
    Cap for 10-L container
    Cap for 10-L container. For easy and safe transportation of filled containers.

    4 piece(s)

  • PVDF connection nipple
    6.1828.000
    PVDF connection nipple

    For 6.1621.000 canister.


    4 piece(s)

  • Guiding sleeve
    6.2709.070
    Guiding sleeve
    For fixation of buret and dosing tips in titration heads and electrode holders

    2 piece(s)

  • Spray nozzle
    6.2740.020
    Spray nozzle

    For the fine-spraying of the rinsing solution.


    6 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Consumable Kit OMNIS Pump Module (2-channel)
    6.05700.010
    Consumable Kit OMNIS Pump Module (2-channel)

    Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.