TitrIC Vario pro III – The professional hyphenated IC and titration system with lockable sample vessels

TitrIC Vario pro III – The professional hyphenated IC and titration system with lockable sample vessels
Katalogové číslo: TitrIC Vario pro III

TitrIC Vario pro III – The professional solution with closed sample vessels.

Fully automatic system for direct measurement of temperature, conductivity and pH value, the titrimetric determination of p and m values, the determination of cations including calcium and magnesium, as well as anions by ion chromatography. The sample changer is equipped with the DisCover function for automatic sample vessel cover removal.

The system consists of 856 Conductivity Module, two 800 Dosinos, 802 Stirrer (rod stirrer), 905 Titrando, 815 Robotic USB Sample Processor XL and one 940 Professional IC Vario TWO/SeS/PP with two "iDetector" conductivity detectors for anions (sequential suppression) and cations.

TitrIC Vario – The power pack for ion analysis.

  • Dokumenty
  • Součástky
  • Možnosti
  • Brochure: TitrIC Vario pro – Multi-parameter analyses through the combination of titration and ion chromatography (english)
    • Prospekt: TitrIC Vario pro – Multiparameteranalysen durch Kombination von Titration und Ionenchromatographie (deutsch)
    • Folleto: TitrIC Vario pro – Análisis multiparámetro combinando la titulación y la cromatografía iónica (español)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    2 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    2 piece(s)

  • 802 Rod Stirrer for 727 Ti Stand
    2.802.0010
    802 Rod Stirrer for 727 Ti Stand
    Rod stirrer with separate 6.2137.000 Speed controller and 6.1909.010 Propeller stirrer.

    1 piece(s)

  • 815 Robotic USB Sample Processor XL (2T/2P)
    2.815.0110
    815 Robotic USB Sample Processor XL (2T/2P)

    Robotic USB Sample Processor XL with two workstations and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. In addition to the built-in pumps, up to two additional pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.

    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    2 piece(s)

  • 854 iConnect
    2.854.0010
    854 iConnect

    854 iConnect - electrode cable and measuring amplifier for intelligent electrodes «iTrodes».

    1 piece(s)

  • 856 Conductivity Module
    2.856.0010
    856 Conductivity Module

    Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
    Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

    The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
    Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.

    1 piece(s)

  • 905 Titrando
    2.905.0010
    905 Titrando

    High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • "iTrode" intelligent electrodes
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • 940 Professional IC Vario TWO/SeS/PP
    2.940.2500
    940 Professional IC Vario TWO/SeS/PP

    The 940 Professional IC Vario TWO/SeS/PP is the intelligent two-channel IC instrument with sequential suppression (one channel) and a peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection methods.

    Typical areas of application:

    • Standard instrument for parallel anion and cation determinations
    • Trace analysis for anions and cations
    • Online monitoring for anions and cations

     

    1 piece(s)

  • iAquatrode plus with Pt1000
    6.0277.300
    iAquatrode plus with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

    1 piece(s)

  • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    6.0915.100
    5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)

    5-ring conductivity measuring cell with cell constant c = 0.7 cm-1, with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.
    This sensor is suitable for measurements of medium conductivities (5 uS/cm to 20 mS/cm), e.g., in:

    • drinking water
    • surface water
    • wastewater

    1 piece(s)

  • Micro titration vessel lid ECO
    6.1414.060
    Micro titration vessel lid ECO

    1 piece(s)

  • Titration vessel / 50-150 mL
    6.1415.250
    Titration vessel / 50-150 mL

    1 piece(s)

  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes

    1 piece(s)

  • Robotic DIS-COVER
    6.1462.080
    Robotic DIS-COVER

    1 piece(s)

  • Aspiration tip / M8 thread
    6.1543.170
    Aspiration tip / M8 thread

    Aspiration tip for the Sample Processors.


    1 piece(s)

  • 3-way stopper with antidiffusion valve
    6.1543.210
    3-way stopper with antidiffusion valve
    Stopper with three buret tips for connecting 3 x M6 tubing

    1 piece(s)

  • Round glass bottle / 1000 mL / GL 45
    6.1608.030
    Round glass bottle / 1000 mL / GL 45

    1 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    1 piece(s)

  • FEP tubing / M6 / 13 cm
    6.1805.010
    FEP tubing / M6 / 13 cm
    With light and kink protection.

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 80 cm
    6.1805.110
    FEP tubing / M6 / 80 cm
    With light and kink protection

    1 piece(s)

  • PTFE tubing / M8 / 60 cm
    6.1805.510
    PTFE tubing / M8 / 60 cm

    With protection against kinks.


    1 piece(s)

  • 
    T connector / M6 inner
    6.1808.060
    T connector / M6 inner

    3 M6 inner threads.


    1 piece(s)

  • 
            
    Adapter Dosino port 4, M6 inner
    6.1808.280
    Adapter Dosino port 4, M6 inner


    Adapter for use with Dosino port 4 in IC. For connecting to M6 connector.


    1 piece(s)

  • 
    PEEK sample tube
    6.1835.030
    PEEK sample tube

    For the Compact Autosampler.


    1 piece(s)

  • Support stand for Sample Processors
    6.2001.070
    Support stand for Sample Processors
    Support stand for Sample Processors, for external titrations and dilutions (IC)

    1 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • RS-232 DB9 - IBM-PC(DB9) connecting cable
    6.2134.040
    RS-232 DB9 - IBM-PC(DB9) connecting cable

    For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box

    1 piece(s)

  • USB/RS-232 Converter for 900 Touch Control
    6.2148.050
    USB/RS-232 Converter for 900 Touch Control
    Extends the 900 Touch Control by an RS-232 interface for the connection of e.g. balance. 

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    2 piece(s)

  • Buffer solutions pH 4, 7 and 9
    6.2307.230
    Buffer solutions pH 4, 7 and 9
    Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL

    1 piece(s)

  • pHit kit
    6.2325.000
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use

    1 piece(s)

  • Screw nut to needle holder IC
    6.2629.000
    Screw nut to needle holder IC
    On Sample Processors

    1 piece(s)

  • Stopper
    6.2709.090
    Stopper
    PTFE. Used with 6.5613.000 ECO titration equipment

    1 piece(s)

  • Septum stopper
    6.2730.020
    Septum stopper
    With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.

    1 piece(s)

  • Stopper
    6.2730.030
    Stopper

    Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.

    5 piece(s)

  • Screw nipple
    6.2730.060
    Screw nipple
    PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment

    3 piece(s)

  • Screw nipple
    6.2730.080
    Screw nipple
    PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    2 piece(s)

  • Flow-through cell for the 6.0915.100/6.0920.100
    6.2763.000
    Flow-through cell for the 6.0915.100/6.0920.100

    Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell

    1 piece(s)

  • MSM Rotor A
    6.2832.000
    MSM Rotor A
    Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)

    1 piece(s)

  • Needle holder 1/8 in. With tubing connection M6
    6.2833.020
    Needle holder 1/8 in. With tubing connection M6
    For Sample Processors. For the connection of FEP tubing with M6 connectors

    1 piece(s)

  • 
    Adapter sleeve for Suppressor Vario
    6.2842.020
    Adapter sleeve for Suppressor Vario

    The use of the adapter sleeve makes it possible to install both the Standard MSM and the MSM-LC rotor in the MSM-HC housing.


    1 piece(s)

  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Sample beaker, clear glass, 75 mL, 1 piece 
    6.1432.210
    Sample beaker, clear glass, 75 mL, 1 piece 

    Sample beaker, clear glass, 75 mL, suitable for sample racks 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece
     

  • Sample beaker, clear glass, 250 mL, 1 piece 
    6.1432.320
    Sample beaker, clear glass, 250 mL, 1 piece 

    Sample beaker, clear glass, 250 mL, suitable for sample racks 6.2041.310, 6.2041.400, 6.2041.430, 6.2041.510, 6.2041.820, 6.2068.020 and 6.2068.030, 1 piece
     

  • Sample beakers, plastic (PP), 120 mL / 250 pieces 
    6.1459.300
    Sample beakers, plastic (PP), 120 mL / 250 pieces 

    Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for sample racks 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030 and 6.9920.141, 250 pieces
     

  • Sample rack 100 x 75 mL
    6.2041.800
    Sample rack 100 x 75 mL
    Sample rack for 100 x 75 mL samples, multi-row
  • Sample rack 34 x 150 mL
    6.2041.810
    Sample rack 34 x 150 mL
    Sample rack for 34 x 150 mL samples, multi-row
  • Sample rack 28 x 250 mL
    6.2041.820
    Sample rack 28 x 250 mL
    Sample rack for 28 x 250 mL samples (6.1432.320), multi-row
  • Sample rack 28 x 200 mL
    6.2041.830
    Sample rack 28 x 200 mL
    Sample rack for 28 x 200 mL samples (6.1459.310), multi-row
  • Sample rack 59 x 120 mL
    6.2041.840
    Sample rack 59 x 120 mL
    Sample rack for 59x120 mL samples (6.1459.300), multi-row
  • 
    TitrIC Vario pro equipment for dilution
    6.5338.100
    TitrIC Vario pro equipment for dilution

    TitrIC Vario pro systems accessory kit for dilution.


  • 
    TitrIC Vario pro equipment for MiPT
    6.5338.110
    TitrIC Vario pro equipment for MiPT

    TitrIC Vario pro systems accessory kit for Partial Loop injections.