Flow Cell in Polypropylene for Screen-Printed Electrodes

Flow Cell in Polypropylene for Screen-Printed Electrodes
Katalogové číslo: FLWCL-P

Polypropylene wall-jet Flow-Cell for FIA. Suitable to be used with standard format Screen-Printed Electrodes with the electrochemical cell in the middle of the strip. Closing system with powerful magnets. Fittings included.

 

 

  • Dokumenty
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode
    110CNT
    Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode

    Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode designed for the development of (bio) sensors with an enhanced electrochemical active area.

  • Screen-Printed Palladium Electrode
    910
    Screen-Printed Palladium Electrode

    Screen-Printed Palladium Electrode. Suitable for working with microvolumes, for decentralized assays or to develop specific sensors.

  • Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) d. 1.6 / Ink BT
    C223BT
    Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) d. 1.6 / Ink BT

    Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) / Ink BT. Working Electrode of 1.6 mm diameter.

  • Cable connector for Screen-Printed Electrodes
    CAC
    Cable connector for Screen-Printed Electrodes

    Connects DropSens Screen-Printed Electrodes to any kind of potentiostat. Recommended when working in batch or flow analysis.

  • μStat Cable connector for Screen-Printed Electrodes
    CAST
    μStat Cable connector for Screen-Printed Electrodes

    Connects any DropSens equipment with DropSens Screen-Printed Electrodes