Flow Cell - Only Working Electrode

 Flow Cell - Only Working Electrode
Katalogové číslo: CFLWCL-WE

Methacrylate wall-jet Flow-Cell for FIA.Its o-ring entraps only the working electrode. Suitable to be used with standard Screen-Printed Electrodes with the electrochemical cell in the center of the strip. Closing system with powerful magnets. Fittings included.

  • Dokumenty
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode
    110CNT
    Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode

    Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode designed for the development of (bio) sensors with an enhanced electrochemical active area.

  • Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT
    250BT
    Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT

    Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT. Suitable for working with microvolumes, for decentralized assays or to develop specific sensors.

  • Cable connector for Screen-Printed Electrodes
    CAC
    Cable connector for Screen-Printed Electrodes

    Connects DropSens Screen-Printed Electrodes to any kind of potentiostat. Recommended when working in batch or flow analysis.

  • μStat Cable connector for Screen-Printed Electrodes
    CAST
    μStat Cable connector for Screen-Printed Electrodes

    Connects any DropSens equipment with DropSens Screen-Printed Electrodes

  • Thick Film Copper Electrode (Aux.:C; Ref.:Ag) / Individually packaged
    CU10
    Thick Film Copper Electrode (Aux.:C; Ref.:Ag) / Individually packaged

    Thick Film Copper Electrode (Aux.:C; Ref.:Ag) / Individually packaged.