VoltIC Vario pro I – The linked system made of IC and voltammetry for parallel determination of anions, cations and heavy metals

VoltIC Vario pro I – The linked system made of IC and voltammetry for parallel determination of anions, cations and heavy metals
Katalogové číslo: VoltIC Vario pro I

VoltIC Vario I is the perfect combination of IC and voltammetry for simultaneous determination of anions, cations and heavy metals. MagIC Net controls IC instruments, starts voltammetric determination, and summarizes all of the IC and voltammetry results.

  • Součástky
  • Možnosti

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • 797 VA Computrace for trace analysis
    2.797.0010
    797 VA Computrace for trace analysis

    The 797 VA Computrace is a modern voltammetric measuring stand that is connected to a PC via a USB port. The computer software provided controls the measurement, records the measured data and evaluates it. Operation is most straightforward due to the well-laid-out structure of the program. The integrated potentiostat with galvanostat guarantees the highest sensitivity with reduced noise.

    Voltammetry system for trace analysis and education. Complete accessories with VA Computrace software and all electrodes for a complete measurement system: Multi-Mode Electrode pro (MME pro), Ag/AgCl reference electrode and Pt auxiliary electrode.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    4 piece(s)

  • 843 VA Peristaltic Pump Station for Compact VA systems
    2.843.0140
    843 VA Peristaltic Pump Station for Compact VA systems

    The 843 Peristaltic Pump Station has two built-in peristaltic pumps that can be controlled directly by the 797 VA Computrace via the remote signal. It is used for the automatic rinsing and emptying of the measuring vessel in partly automated and fully automated VA and CVS systems with the 797 VA Computrace.

    The version for voltammetry is equipped with the complete accessories for the automatic rinsing and emptying of the measuring vessel.

    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    2 piece(s)

  • 
    858 Professional Sample Processor – Pump
    2.858.0020
    858 Professional Sample Processor – Pump

    The 858 Professional Sample Processor – Pump processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or with an 800 Dosino.


    1 piece(s)

  • 940 Professional IC Vario TWO/SeS/PP
    2.940.2500
    940 Professional IC Vario TWO/SeS/PP

    The 940 Professional IC Vario TWO/SeS/PP is the intelligent two-channel IC instrument with sequential suppression (one channel) and a peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection methods.

    Typical areas of application:

    • Standard instrument for parallel anion and cation determinations
    • Trace analysis for anions and cations
    • Online monitoring for anions and cations

     

    1 piece(s)

  • Round glass bottle / 1000 mL / GL 45
    6.1608.030
    Round glass bottle / 1000 mL / GL 45

    1 piece(s)

  • Drying bottle / 100 mL / GL 45
    6.1608.050
    Drying bottle / 100 mL / GL 45

    2 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • PTFE Capillary i.d. 0.25 mm / 1 m
    6.1803.150
    PTFE Capillary i.d. 0.25 mm / 1 m

    1 piece(s)

  • FEP tubing / M6 / 2 m
    6.1805.530
    FEP tubing / M6 / 2 m
    With light and kink protection

    1 piece(s)

  • PTFE tube
    6.1819.010
    PTFE tube
    As gas inlet in washing bottle of VA Stand

    2 piece(s)

  • PEEK connection capillary
    6.1822.410
    PEEK connection capillary
    Connection capillary for sample transfer with sample changers, 1 x M6, inner diameter 0.5 mm, for trace analysis

    1 piece(s)

  • PVC pump tubing (blue/blue)
    6.1826.020
    PVC pump tubing (blue/blue)
    For online IC instruments and automation in voltammetry.

    1 piece(s)

  • PEEK capillary 0.75 mm i.d., 70 cm
    6.1831.070
    PEEK capillary 0.75 mm i.d., 70 cm
    For Advanced VA Sample Processor

    1 piece(s)

  •  Sample rack 56 x 11 mL + 56 x 50 mL
    6.2041.450
    Sample rack 56 x 11 mL + 56 x 50 mL

    Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).


    1 piece(s)

  • Bottle holder, double
    6.2055.100
    Bottle holder, double

    Bottle holder for 2 x 1 L bottles. For 6.5617.000 aspiration equipment

    1 piece(s)

  • Holder for Dosino for Sample Processor
    6.2057.040
    Holder for Dosino for Sample Processor
    Holder for Dosino for the 838 / 858 IC Sample Processor and the 838 Advanced VA Sample Processor

    1 piece(s)

  • RS-232 cable, 5 m, DB9 – DB9
    6.2134.100
    RS-232 cable, 5 m, DB9 – DB9
    Connecting Metrohm RS-232 interface to Titrinos, 756 KF Coulometer, 762 or 771 IC Interfaces, 790 Personal IC, 743 Rancimat, 763 PVC Thermomat, 873 Biodiesel Rancimat.

    1 piece(s)

  • Connection cable 843 Pump Station  to 838 Advanced Sample Processor
    6.2141.290
    Connection cable 843 Pump Station  to 838 Advanced Sample Processor
    Cable for the remote connection of the 843 Pump Station with the 838 Advanced Sample Processor.

    1 piece(s)

  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.

    1 piece(s)

  • USB/RS-232 Converter for 900 Touch Control
    6.2148.050
    USB/RS-232 Converter for 900 Touch Control
    Extends the 900 Touch Control by an RS-232 interface for the connection of e.g. balance. 

    2 piece(s)

  • Sample tubes 11 mL
    6.2743.057
    Sample tubes 11 mL
    200 pieces. For IC Sample Processors and VA Autosampler

    1 piece(s)

  • Stopper with perforation
    6.2743.077
    Stopper with perforation
    200 pieces. For IC Sample Processors

    1 piece(s)

  • Coupling olive/UNF 10/32, 2x
    6.2744.034
    Coupling olive/UNF 10/32, 2x

    Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Sample vessel 50 mL
    6.2747.010
    Sample vessel 50 mL

    With blue screw cap and mL graduation. Set of 25 pieces.


    1 piece(s)

  • Connecting set to Dosing Unit: port 4
    6.5620.000
    Connecting set to Dosing Unit: port 4
    For connecting a tubing to port 4 of the Dosing Unit (Luer to M6), incl. fixation

    1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Metrosep A SUPP 5 Guard/4.0
    6.1006.500
    Metrosep A SUPP 5 Guard/4.0

    The Metrosep A Supp 5 Guard/4.0 reliably protects the Metrosep A Supp 5 and 7 IC anion columns against contamination from the sample or the eluent.

    It contains the same separation material as the Metrosep A Supp 5, is also made of PEEK, and is screwed directly onto the respective separation column with nearly no dead volume ("On Column Guard System"). The guard column prolongs the service life of the analytical column, with practically no influence on its chromatographic separating efficiency. The economical price and simple handling make using the A Supp 5 Guard/4.0 highly recommended.

  • Metrosep A Supp 5 - 150/4.0
    6.1006.520
    Metrosep A Supp 5 - 150/4.0

    The 150 mm version of the Metrosep A Supp 5 is distinguished by its very good separation properties. High plate numbers and excellent peak symmetries facilitate working in the lower µg/L range. The particle size of 5 µm makes a decisive contribution to the separating efficiency of this column. The Metrosep A Supp 5 - 150/4.0 offers the optimum combination of selectivity and capacity, allowing even complex separation tasks to be solved within a short time. This property makes the Metrosep A Supp 5 - 150/4.0 one of the best universally applicable standard IC columns.

  • Metrosep C 4 - 100/4.0
    6.1050.410
    Metrosep C 4 - 100/4.0

    The 100 mm version of the Metrosep C 4 column is intended for rapid determinations of standard cations. Very short retention times are achieved; however the elution times of sodium and ammonium still differ by 25 s. When a special eluent is used, the six cations lithium, ammonium, sodium, calcium, magnesium and potassium can be determined in less than 5 minutes with the Metrosep C 4 - 100/4.0.

  • Metrosep C 4 Guard/4.0
    6.1050.500
    Metrosep C 4 Guard/4.0


    The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contaminations are reliably retained, allowing the lifetime of the analytical separation column to be prolonged considerably. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also functions according to the "On Column Guard System" and is screwed directly onto the separation column with nearly no dead volume.


  • MSM Rotor A
    6.2832.000
    MSM Rotor A
    Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
  • MSM-HC Rotor A
    6.2842.000
    MSM-HC Rotor A
    Suppressor rotor for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity)
  • 
    Adapter sleeve for Suppressor Vario
    6.2842.020
    Adapter sleeve for Suppressor Vario

    The use of the adapter sleeve makes it possible to install both the Standard MSM and the MSM-LC rotor in the MSM-HC housing.


  • MSM-LC Rotor A
    6.2844.000
    MSM-LC Rotor A
    Suppressor rotor for use with 2 mm columns.
  • 
    IC equipment: MiPCT-ME
    6.5330.160
    IC equipment: MiPCT-ME

    Accessory set for assembling a Dosino for Metrohm intelligent Preconcentration Technique with Matrix Elimination (MiPCT-ME).