Katalogové číslo: 6.00204.300

Digital, combined pH electrode for OMNIS with double-junction construction. This electrode is suitable for pH measurements/titrations of samples:

  • that contaminate the reference system of the electrode (e.g., galvanic baths, samples containing sulfides)
  • for which potassium chloride c(KCl) = 3 mol/L cannot be used as reference electrolyte (e.g., reaction of potassium or chloride with sample)

The electrode is equipped with a flexible ground-joint diaphragm which is insensitive to contamination and which can be exchanged when needed.
When c(KCl) = 3 mol/L is used as as bridge electrolyte, storage in storage solution is recommended.
The bridge electrolyte can be easily replaced with a suitable electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.

  • Technické specifikace
  • Dokumenty
  • Applications
  • Součástky
  • Možnosti
Diaphragm Ground-joint diaphragm
Electrode plug-in head Metrohm plug-in head Q
Electrode slope > 0.97
Electrode zero point (mV) ± 15
Electrolyte flow rate (μl/h) at 10 cm water column 20 ... 100
Indicator electrode shape Cylinder
Max. installation length (mm) 125
Measuring range 0 ... 14
Measuring unit pH
Membrane glass type U
Membrane resistance 150 … 500 MΩ
Min. immersion depth (mm) 30
Reference electrolyte type c(KCl) = 3 mol/L
Reference system LL system
Resistance (kOhm) < 5
SGJ sleeve Flexible SGJ sleeve
Shaft diameter bottom (mm) 12
Shaft diameter top (mm) 12
Shaft material Glass
Temperature range, long-term (°C) 0 ... 70
Temperature range, short-term (°C) 0 ... 100