881 Metrohm Combustion IC


    881 Metrohm Combustion IC
Katalogové číslo: 2.881.3030

The 881 Metrohm Combustion IC enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion with subsequent ion chromatography determination (Combustion IC). It comprises all required components, e.g. the Combustion Module from Analytik Jena (2.136.0700), the 920 Absorber Module, the 881 Compact IC pro - Anion - MCS and the MagIC Net™ software. If necessary, the 881 Metrohm Combustion IC package can be supplemented with an Autosampler for solid or liquid samples (MMS 5000 Autosampler). The entire analysis, including sample input and sample digestion, is completely automated and is completely controlled by MagIC Net™.

  • Dokumenty
  • Součástky
  • Declaration of conformity for 881 Compact IC pro (English) (english)
  • Declaration of Conformity for 920 Absorber Module (english)
  • ETL certificate Professional IC "Authorization To Mark" (english)
  • Manual for 881 Compact IC pro – Anion – MCS, 2.881.0030 (english)
    • Manual for  881 Compact IC pro – Anion – MCS, 2.881.0030 (中文)
    • Mode d'emploi pour  881 Compact IC pro – Anion – MCS, 2.881.0030 (français)
    • Handbuch zu 881 Compact IC pro – Anion – MCS, 2.881.0030 (deutsch)
    • Manual para  881 881 Compact IC pro – Anion – MCS, 2.881.0030 (español)
  • Supplement to 850, 881, 882, 883 anion manuals  
  • Supplement to 850, 881, 882, 883 Manuals (english)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Metrosep A Trap 1 - 100/4.0
    6.1014.000
    Metrosep A Trap 1 - 100/4.0

    High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0. Should these anionic contaminants elute at a later time, there will be practically no further noticeable influence on the baseline, due to the enormous peak widening.


    This column is primarily used with gradient applications.


    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    2 piece(s)

  • 
    Bottle attachment / GL 45 - 3 x UNF 10/32
    6.1602.150
    Bottle attachment / GL 45 - 3 x UNF 10/32

    For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.


    3 piece(s)

  • 
            
    Eluent bottle cap GL 45
    6.1602.160
    Eluent bottle cap GL 45
    For eluent bottles, with connectors for the adsorber tube and the aspiration tubing.

    3 piece(s)

  • Attachment 5 x UNF 10/32 for «Waste Collector»
    6.1602.210
    Attachment 5 x UNF 10/32 for «Waste Collector»

    Attachment for holding up to 5 waste capillaries.

    1 piece(s)

  • Glass bottle / 1000 mL / GL 45
    6.1608.020
    Glass bottle / 1000 mL / GL 45

    Bottle for auxiliary solutions.

    2 piece(s)

  • Drying bottle / 100 mL / GL 45
    6.1608.050
    Drying bottle / 100 mL / GL 45

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    3 piece(s)

  • Adsorbing tube, large and bent
    6.1609.000
    Adsorbing tube, large and bent
    For filling with adsorber material.

    3 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    2 piece(s)

  • PTFE capillary 0.97 mm i.d. / 5 m
    6.1803.020
    PTFE capillary 0.97 mm i.d. / 5 m
    For all IC instruments

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    3 piece(s)

  • PTFE capillary 0.5 mm i.d. / 1 m
    6.1803.040
    PTFE capillary 0.5 mm i.d. / 1 m
    Capillary for sample handling in IC.

    1 piece(s)

  • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    6.1803.130
    Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    Connecting capillary from the eluent components to the Eluent Synthesizer

    1 piece(s)

  • 
            
    PTFE capillary 0.75 mm i.d. / 3 m
            
     
    6.1803.160
    PTFE capillary 0.75 mm i.d. / 3 m  


    PEEK capillary for use with adsorber module.


    4 piece(s)

  • FEP tubing / M6 / 9 cm
    6.1805.040
    FEP tubing / M6 / 9 cm
    With light and kink protection

    2 piece(s)

  • Y-connector for tubing 6-9 mm i.d.
    6.1807.010
    Y-connector for tubing 6-9 mm i.d.
    Connector for waste tubing

    1 piece(s)

  • 
    T connector / M6 inner
    6.1808.060
    T connector / M6 inner

    3 M6 inner threads.


    1 piece(s)

  • 
            
    Adapter Dosino port 4, M6 inner
    6.1808.280
    Adapter Dosino port 4, M6 inner


    Adapter for use with Dosino port 4 in IC. For connecting to M6 connector.


    1 piece(s)

  • Spiral band 0.5 m
    6.1815.010
    Spiral band 0.5 m
    For holding together different cables or tubing.

    1 piece(s)

  • Silicone tubing 6 mm i.d., 1 m
    6.1816.020
    Silicone tubing 6 mm i.d., 1 m
    For waste tubing.

    2 piece(s)

  • Silicone tubing 6 mm i.d. /  2 m
    6.1816.080
    Silicone tubing 6 mm i.d. /  2 m


    Drainage tubing to the "Waste Collector".


    1 piece(s)

  • PEEK sample loop 250 µL
    6.1825.290
    PEEK sample loop 250 µL

    Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.

    1 piece(s)

  • PharMed® pump tubing (orange/yellow), 3-stopper
    6.1826.420
    PharMed® pump tubing (orange/yellow), 3-stopper

    For MSM regeneration with peristaltic pump.


    2 piece(s)

  • PEEK capillary 0.5 mm i.d., 15 cm
    6.1831.040
    PEEK capillary 0.5 mm i.d., 15 cm
    For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • 
    FEP tubing connection to Absorber Module, M6, 150 cm
    6.1838.020
    FEP tubing connection to Absorber Module, M6, 150 cm

    2 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    3 piece(s)

  • Adsorption cartridge holder (ProfIC)
    6.2057.080
    Adsorption cartridge holder (ProfIC)
    Holder to install adsorption cartridges in Professional IC Instruments

    1 piece(s)

  • 
    Holder to Waste Collector
    6.2057.220
    Holder to Waste Collector

    Holder for fastening the Waste Collector to the IC instrument.


    1 piece(s)

  • 
    Dosino holder for the Absorber Module
     
    6.2057.230
    Dosino holder for the Absorber Module  

    Holder for fastening Dosinos to the Absorber Module.


    2 piece(s)

  • Cable USB A - USB B  1.8 m
    6.2151.020
    Cable USB A - USB B 1.8 m
    USB connecting cable

    2 piece(s)

  • Colored sleeves for capillaries
    6.2251.000
    Colored sleeves for capillaries
    Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.

    2 piece(s)

  • 
    Absorber tube to the Absorber Module
    6.2421.000
    Absorber tube to the Absorber Module

    Absorber tube for the absorption of the combustion gases from the Combustion Module.


    1 piece(s)

  • Tool for piston seal
    6.2617.010
    Tool for piston seal
    For removing and assembling the piston seal for all standard pump heads

    1 piece(s)

  • Adjustable wrench
    6.2621.000
    Adjustable wrench
    Max. opening: 20 mm. For IC instruments

    2 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 1/4 in. wrench
    6.2621.050
    1/4 in. wrench
    For 1/4 in. screws. For IC instruments

    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • 
    3 mm hex key for IC Sample Processors
    6.2621.100
    3 mm hex key for IC Sample Processors

    1 piece(s)

  • Wrench
    6.2739.000
    Wrench
    For tightening connectors

    2 piece(s)

  • Stopper for overflow (ProfIC), 5 pieces
    6.2743.080
    Stopper for overflow (ProfIC), 5 pieces
    For Professional IC instruments

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    3 piece(s)

  • Luer/UNF coupling
    6.2744.020
    Luer/UNF coupling
    For IC instruments

    3 piece(s)

  • Coupling olive/UNF 10/32, 2x
    6.2744.034
    Coupling olive/UNF 10/32, 2x

    Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.

    1 piece(s)

  • 2 x UNF 10/32 coupling
    6.2744.040
    2 x UNF 10/32 coupling
    For connecting 1/16 in. capillaries. For IC instruments

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    2 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Pressure screw long
    6.2744.090
    Pressure screw long
    Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)

    6 piece(s)

  • Pressure screw PEEK UNF 1/4-28, 3 pieces
    6.2744.170
    Pressure screw PEEK UNF 1/4-28, 3 pieces
    Fixing connecting capillaries of the eluent components at the Eluent Synthesizer

    1 piece(s)

  • Pump tubing connector with security lock and filter
    6.2744.180
    Pump tubing connector with security lock and filter
    For the connection of a pump tubing and a capillary with built-in filter

    2 piece(s)

  • Adapter UNF 10/32 outer / M6 inner
    6.2744.200
    Adapter UNF 10/32 outer / M6 inner
    Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)

    1 piece(s)

  • Tubing adaptor for aspiration filter (ProfIC)
    6.2744.210
    Tubing adaptor for aspiration filter (ProfIC)
    For Professional IC instruments

    1 piece(s)

  • Screw stopper 10/32 long
    6.2744.220
    Screw stopper 10/32 long
    For Professional IC Instruments. For sealing unused ports of degassers and MCS.

    8 piece(s)

  • 
    PEEK pressure screw 14 mm, 3 pcs.
    6.2744.350
    PEEK pressure screw 14 mm, 3 pcs.

    With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.


    2 piece(s)

  • Container with GL 45 drainage to the "Waste Collector"
    6.2765.000
    Container with GL 45 drainage to the "Waste Collector"


    Container with drainage to the "Waste Collector".


    1 piece(s)

  • 
    Holder for absorber tubing
    6.2766.000
    Holder for absorber tubing

    Holder for fastening the absorber tubing in the Absorber Module.


    1 piece(s)

  • 
    Holder for inlet valve
    6.2766.010
    Holder for inlet valve

    Holder for inlet valve to the Absorber Module.


    1 piece(s)

  • Syringe 10 mL with Luer connection
    6.2816.020
    Syringe 10 mL with Luer connection
    For various applications in IC and VA

    1 piece(s)

  • Purge tubing
    6.2816.040
    Purge tubing
    With PTFE tubing and Luer connection. For syringes. For aspirating eluents.

    1 piece(s)

  • Aspiration filter
    6.2821.090
    Aspiration filter
    Pore size 20 µm, set of 5 pieces. For 6.1834.000 Aspiration tubing and 6.1821.040 and 6.1821.050 Filter tubes.

    1 piece(s)

  • Spare filter for inline filter
    6.2821.130
    Spare filter for inline filter
    Spare filter for inline filter.

    1 piece(s)

  • Inlet valve PEEK
    6.2824.170
    Inlet valve PEEK
    Metal-free check valve for the inletof IC pump heads

    1 piece(s)

  • H2O adsorption cartridge
    6.2837.010
    H2O adsorption cartridge
    To CO2 Suppressor. Water adsorption cartridge for the aspirated air.

    2 piece(s)

  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)