More Samples in Minimal
Space |
| If a 786 Swing Head is
used then the numbers and amounts of samples can be
varied within very wide limits. The increased
flexibility results as the range of positions
on the Sample Processor which can be accessed is considerably
increased. The 786 Swing Heads are true masters in accuracy:
they move pipetting tips to microtiter plates millimeter
by millimeter or take up disposable filters. |
Titration version |
Direct titration in the sample vessel with everything
you need. The titration head is large enough to accommodate
an 802 Rod Stirrer, two sensors as well as three buret
tips. At the end of the titration this inserts is rinsed
by three spray nozzles and the rinsing solution is aspirated
off completely. This reliably prevents cross-contamination.
|
Pipetting version |
Pipetting is a complicated sample preparation step
- but fortunately it can be fully automated. You no longer
need to bother about the time-consuming measuring out
of the sample and also profit from the high degree of
dosing accuracy of the Dosino, which works with a volume
resolution of 10 000 steps per buret volume.
|
External titration |
The Sample Processor cannot only use its versatile
components on the sample rack, it is also able to serve
externally situated titration cells. Pipetting and/or
transferring is no problem for the Sample Processor. The
samples are transferred to the external cell where the
determination takes place, e.g. in a connected titration
cell. During the determination the Sample Processor is
ready to carry out other tasks, no matter whether these
include a parallel titration or the preparation of the
next sample.
|
No time is lost, as
time is money! |
Ordering Information
Ordering information for 786 Swing Head
accessories
|
Automation in Titration
– quite easy with Metrohm |
Get more information
If you wish to get more information you may either
submit our reply
form or send an e-mail to info@metrohm.com. |
