|
|
 |
|
|
|
727 Titration Stand
With propeller or magnetic stirrer
|
In pH measurements, direct potentiometry and titrations
performed in analytical laboratories, both the stirring
of samples and thorough cleaning of the measurement setup
are of paramount importance.
The 727 Titration Stand from Metrohm offers a complete
solution to the problem of stirring, rinsing and manual
sample changing. Pressing the rinsing unit «showers» electrodes,
burette tips and rod stirrer from above via the rinse
nozzles integrated in the measuring head. In the centre
of the beaker base there is an outlet for any spilled
solvents.
Depending on the model, the
titration stand allows stirring to be performed either
with a propeller from above or magnetic from below
or alternately from above and below. The speed range
of the rod stirrer lies between
500 and 2400 rpm. To change the sample, simply raise
the measuring head. This automatically switches off
the stirrer. As soon as the measuring head is in
the measuring position again, the stirrer restarts.
Two storage vessels ensure the safe storage of the
electrodes.
|
Get more information
If you wish to get more information you may either
submit our reply
form or send an e-mail to info@metrohm.com.
|
Dispensing, diluting and pipetting – quite
easy with Metrohm
|
Ordering information
727 Titration Stand with rinsing pump and rinsing head
(CE)
For connection to Instruments with stirrer connector
(e.g. Titrino, 645, 665/765, 715/775, 725/776 Dosimat, 796 Titrop.)
|
| 2.727.0010 |
727 Titration Stand with rinsing pump and rinsing head;
without stirrer
(The 2.802.0040
Rod Stirrer is to be ordered separately) |
| 2.727.0100 |
727 Titration Stand with rinsing pump and rinsing head;
with built-in magnetic stirrer |
With mains unit for 220V, Euro plug (e.g. pH Meter, Conductometer, 685
Dosimat, 700 Titrino) |
| 2.727.0014 |
727 Titration Stand with rinsing pump and rinsing head;
without stirrer
(The 2.802.0040
Rod Stirrer is to be ordered separately) |
| 2.727.0104 |
727 Titration Stand with rinsing pump and rinsing head;
with built-in magnetic stirrer |
With mains unit for 110V, US plug (e.g. pH Meter, Conductometer,
685 Dosimat, 700 Titrino) |
| 2.727.0011 |
727 Titration Stand with rinsing pump and rinsing head;
without stirrer
(The2.802.0040
Rod Stirrer is to be ordered separately) |
| 2.727.0101 |
727 Titration Stand with rinsing pump and rinsing head;
with built-in magnetic stirrer |
|
|
|
|
|
|
|
|
|
