tiamo

tiamo logo

Current Version: tiamoTM 2.4

tiamoTM is a control and database software for titrators, dosing devices and sample changers that allows complete laboratory automation, which is why the name tiamo stands for «titration and more» – tiamoTM can do far more than just titrate.

> Learn about the different tiamoTM versions and additional licences here.

> FAQ about tiamoTM

> tiamoTM Knowledge Base

Downloads

Important hints

Never execute an upgrade from tiamo 1.x to tiamo 2.x without a valid licence code for tiamo 2.x! Without a valid licence code you get only a demo version which expires after 30 days. A downgrade from tiamo 2.X back to tiamo 1.X is NOT possible!

To get a valid tiamo 2.X licence code, please contact your local Metrohm distributor.

If you install the Chinese or traditional Chinese language update please make sure, that the respective character support is activated in the language settings of your personal computer.

In order to install a language update, extract and execute the EXE file from the downloaded and compressed ZIP file. Installation will then be carried out automatically.

Go to the tiamo version:

tiamoTM 2.4tiamoTM 2.3tiamoTM 2.2tiamoTM 2.1tiamoTM 2.0

tiamoTM 1.3tiamoTM 1.2.1tiamoTM 1.2tiamoTM 1.1tiamoTM 1.0


tiamo 2.4

Download the tiamoTM 2.4 version with the newest upgrades here:

> Download tiamoTM 2.4

The following additional dialog languages can be downloaded for tiamoTM 2.4:

Downloads

tiamo 2.3

Download the tiamoTM 2.3 version with the newest upgrades here:

> Download tiamoTM 2.3

> Patch 1 for tiamoTM 2.3

The main improvement with this patch is:

Program part Configuration
  • the limitation to two devices applies only for Metrohm devices (Titrino, Titrando, etc.); that means that balances and other generic (i.e. non-Metrohm) devices can be included without limitation.

The following additional dialog languages can be downloaded for tiamoTM 2.3:

Downloads

tiamo 2.2

Download the tiamoTM 2.2 version with the newest upgrades here:

> Download tiamoTM 2.2

> Patch 1 for tiamoTM 2.2

This patch eliminates the following bugs:
  • In the dialog window Reprocessing on the tab Statistics, the table is not being shown.
  • If the monitoring of the titer validity, the common variable, the global variable or the calibration data has expired, it is not possible to newly determine the titer, the common variable or the global variable via the CALC command ("Save result as...") or to carry out a calibration.
  • The program crashes when running MET determinations with Titrinos.
  • If the beaker test is enabled and the action "Stop determination and series" is selected in the MOVE command for the beaker test, then the error track will not being run through when a beaker is missing

The following additional dialog languages can be downloaded for tiamoTM 2.2:

Downloads

tiamo 2.1

Download the tiamoTM 2.1 version with the newest upgrades here:

> Download tiamoTM 2.1

The following additional dialog languages can be downloaded for tiamoTM 2.1:

Downloads

tiamo 2.0

Download the tiamoTM 2.0 version with the newest upgrades here:

> Download tiamoTM 2.0

> Patch 1 for tiamoTM 2.0

This patch eliminates the following bugs:

  • when doing a SET, KFT or KFC with deactivated 'Automatic conditioning' a start drift of 0.0 was taken
  • when doing an upgrade from tiamo 1.3 to 2.0 the BackupServer.exe wasn't replaced
  • the remote interface for the devices 778, 789, 888 and 890 didn't work or wasn't available, at all
  • the evaluation with window didn't work with Titrinos
  • when switching of the reference temperature for MEAS Cond an exception occured

The following additional dialog languages can be downloaded for tiamoTM 2.0:

Downloads

tiamo 1.3

Download the tiamoTM 1.3 version with the newest upgrades here:

> Download tiamoTM 1.3

The following additional dialog languages can be downloaded for tiamoTM 1.3:

Downloads

tiamo 1.2.1

Download the tiamoTM 1.2.1 version with the newest upgrades here:

> Download tiamoTM 1.2.1

The following additional dialog languages can be downloaded for tiamoTM 1.2.1:


tiamo 1.2

Download the tiamoTM 1.2 version with the newest upgrades here:

> Download tiamoTM 1.2

> Patch 1 for tiamoTM 1.2

> Patch 2 for tiamoTM 1.2

Patch 1 eliminates the following bug in tiamoTM 1.2:

  • When a method is started, which utilisizes the diff-measuring input, then misleadingly the following message appears:
    "Wrong measuring input (011-122)."
    The text is for example like:
    "The non-intelligent sensor 'pH Electrode' demanded by the command 'MEAS pH' can't be connected to the measuring input 3 at device ''702_1'. Choose a different sensor or a different measuring input."

Patch 2 eliminates the following bugs in tiamoTM 1.2:

  • While manual actions in one device (manual control or while method run) it may happen, that the reservation of the device isn't enabled in a correct way.
  • Additionally, this Patch 2 includes Patch 1 (cummulative Patch).

tiamo 1.1

Download the tiamoTM 1.1 version with the newest upgrades here:

> Download tiamoTM 1.1

> Progress Bar Patch

> Timer Patch


tiamo 1.0

Download the tiamoTM 1.0 version with the newest upgrades here:

> Download tiamoTM 1.0