855 Robotic Titrosampler "Basic" (1T/2P)

855 Robotic Titrosampler "Basic" (1T/2P)
Order Number: 2.855.0020

Basic model for setting up customer-specific automation in the titration. Space-saving Robotic Sample Processor XL with integrated Titrando, one workstation including Swing Head and two built-in membrane pumps. The programming of the methods is accomplished by means of the handy Touch Control or with the tiamo™ titration software.

  • Documents
  • Parts
  • Options
  • 8.856.8006
    Release Notes for various instruments, USB 3.0 compatibility
  • 8.855.8001
    Manual 855 Robotic Titrosampler
  • 8.855.5001
    Brochure: 855 Robotic Titrosampler – Integrated system for automatic sample preparation and analysis
  • 8.855.3003
    Declaration of conformity 855 Robotic Titrosampler, English
  • Sleeve with SGJ 14/12 mm
    6.1236.020
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm and O-ring.

    2 piece(s)

  • Aspiration tip / M8 thread
    6.1543.170
    Aspiration tip / M8 thread

    Aspiration tip for the Sample Processors.


    1 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    2 piece(s)

  • FEP tubing / M6 / 60 cm
    6.1805.060
    FEP tubing / M6 / 60 cm
    With light and kink protection

    3 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    1 piece(s)

  • PTFE tubing / M8 / 60 cm
    6.1805.510
    PTFE tubing / M8 / 60 cm

    With protection against kinks.


    1 piece(s)

  • 
    PTFE tubing 4 mm / 6 mm / 4 m
    6.1812.000
    PTFE tubing 4 mm / 6 mm / 4 m

    2 piece(s)

  • PVDF connection nipple
    6.1828.000
    PVDF connection nipple

    For 6.1621.000 canister.


    2 piece(s)

  • Cable clip
    6.2053.000
    Cable clip
    Cable clip for fastening cables and tubes

    1 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2 mm
    6.2621.130
    Hexagon key 2 mm
    2 mm.

    1 piece(s)

  • Hexagon key 2.5 mm
    6.2621.140
    Hexagon key 2.5 mm

    1 piece(s)

  • Spray nozzle
    6.2740.020
    Spray nozzle

    For the fine-spraying of the rinsing solution.


    3 piece(s)

  • Safety shield
    6.2751.100
    Safety shield


    Safety shield for Sample Processors with 786 Swing Head


    1 piece(s)

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

  • 849 Level Control
    2.849.0010
    849 Level Control
    Additional equipment for Sample Processors for monitoring the filling level of rinsing or waste canisters via Remote. Prevents pumps from running dry and/or canisters from overflowing and is suitable for use with aqueous solutions, solvents and suspensions.
  • Robotic arm with transfer head for 786 Swing Head, left swinging
    6.1462.030
    Robotic arm with transfer head for 786 Swing Head, left swinging
    Transfer robotic arm for liquid handling purposes
  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes
  • Robotic arm with titration head for 786 Swing Head, left or right swinging
    6.1462.050
    Robotic arm with titration head for 786 Swing Head, left or right swinging
    Titration head for Swing Head
  • Robotic arm with holder for titration head, left swinging
    6.1462.060
    Robotic arm with holder for titration head, left swinging
    Titration head holder to 786 Swing Head
  • Robotic arm with holder for titration head, right swinging
    6.1462.070
    Robotic arm with holder for titration head, right swinging
    Titration head holder to 786 Swing Head
  • Robotic arm with Luer-Lock adapter for 786 Swing Head, right swinging
    6.1462.090
    Robotic arm with Luer-Lock adapter for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling
  • Robotic arm with titration head and beaker sensor for 786 Swing Head, left or right-swinging
    6.1462.150
    Robotic arm with titration head and beaker sensor for 786 Swing Head, left or right-swinging
    Titration head with beaker sensor for 786 Swing Head, 2 x M10, 1 x SGJ 14.5, 2 x buret tip
  • Robotic arm with holder for titration head and sensor for 786 Swing Head, left swinging
    6.1462.160
    Robotic arm with holder for titration head and sensor for 786 Swing Head, left swinging
    Titration head holder with beaker sensor for 786 Swing Head
  • Robotic arm with holder for titration head and sensor for 786 Swing Head, right swinging
    6.1462.170
    Robotic arm with holder for titration head and sensor for 786 Swing Head, right swinging
    Titration head holder with beaker sensor for 786 Swing Head
  • Stirring propeller / 96 mm
    6.1909.010
    Stirring propeller / 96 mm
    Propeller stirrer, length from lower edge of SGJ: 96 mm. For use with beakers with 722, 802 Rod Stirrer
  • Stirring propeller / 104 mm
    6.1909.020
    Stirring propeller / 104 mm
    Propeller stirrer, length from lower edge of SGJ: 104 mm. For use with beakers with 722, 802 Rod Stirrer
  • Stirring propeller / 104 mm
    6.1909.030
    Stirring propeller / 104 mm
    Propeller stirrer with PP shaft, PVDF tip. Length from the SGJ: 104 mm. For KF applications with 722, 802 Rod Stirrer
  • Stirring propeller / 102 mm
    6.1909.040
    Stirring propeller / 102 mm
    Propeller stirrer, length from lower edge of SGJ: 102 mm. For titration vessels with SGJ 14/15 and 722, 802 Rod Stirrer
  • Propeller for 120 mL beaker (6.1459.300)
    6.1909.050
    Propeller for 120 mL beaker (6.1459.300)
    Propeller for 802 Stirrer when this is used with sample racks for 120 mL beakers (6.1459.300)
  • Sample rack 126 x 11 mL
    6.2041.400
    Sample rack 126 x 11 mL
    Sample rack for 126 x 11 mL samples, multi-row
  • Sample rack 141 x 11 mL
    6.2041.410
    Sample rack 141 x 11 mL

    Sample rack for 141 x 11 mL samples, multi-row.

  • Sample rack 127 x 11 mL
    6.2041.430
    Sample rack 127 x 11 mL

    Sample rack for 127 x 11 mL samples with 2 rinsing beakers.

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

  •  Sample rack 56 x 11 mL + 56 x 50 mL
    6.2041.450
    Sample rack 56 x 11 mL + 56 x 50 mL

    Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).


  • Sample rack 160 x 6 mL
    6.2041.710
    Sample rack 160 x 6 mL
    Sample rack 160 x 6 mL vials
  • Sample rack 100 x 75 mL
    6.2041.800
    Sample rack 100 x 75 mL
    Sample rack for 100 x 75 mL samples, multi-row
  • Sample rack 34 x 150 mL
    6.2041.810
    Sample rack 34 x 150 mL
    Sample rack for 34 x 150 mL samples, multi-row
  • Sample rack 28 x 250 mL
    6.2041.820
    Sample rack 28 x 250 mL
    Sample rack for 28 x 250 mL samples (6.1432.320), multi-row
  • Sample rack 28 x 200 mL
    6.2041.830
    Sample rack 28 x 200 mL
    Sample rack for 28 x 200 mL samples (6.1459.310), multi-row
  • Sample rack 59 x 120 mL
    6.2041.840
    Sample rack 59 x 120 mL
    Sample rack for 59x120 mL samples (6.1459.300), multi-row
  • Sample rack 59 x 120 mL, PP
    6.2041.850
    Sample rack 59 x 120 mL, PP
    Sample rack for 59x120 mL samples (6.1459.300), multi-row
  • Sample rack insert 54 x 75 mL for water bath
    6.2041.900
    Sample rack insert 54 x 75 mL for water bath
    Insert for waterbath rack 54 x 75 mL
  • Tower extension for Sample Processors
    6.2058.110
    Tower extension for Sample Processors
    Height extension 130 mm fpr Sample Processors.Tower extension for COD applications.
  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • Water bath for Robotic Sample Processors and Robotic Titrosampler
    6.2840.000
    Water bath for Robotic Sample Processors and Robotic Titrosampler
    Water bath rack for Robotic Sample Processors and Titrosampler.
  • 
    External rinsing station for robotic arm with 6.1458.040 titration head
    6.2841.010
    External rinsing station for robotic arm with 6.1458.040 titration head

    The external rinsing station can be fitted on the side next to the Robotic Sample Processor tower, making it possible for external cleaning of the titration equipment to be carried out during additional actions on the sample rack.