tiamo™ 1.1
Progress Bar Patch
Timer Patch
tiamo™ 1.2
Patch 1
This Patch eliminates the following bug in tiamo 1.2:
When a method is started, which utilisizes the diff-measuring input, then misleadingly the following message appears:
"Wrong measuring input (011-122)."
The text is for example like:
"The non-intelligent sensor 'pH Electrode' demanded by the command 'MEAS pH' can't be connected to the measuring input 3 at device ''702_1'. Choose a different sensor or a different measuring input."
Patch 2
This Patch eliminates the following bug in tiamo 1.2:
While manual actions in one device (manual control or while method run) it may happen, that the reservation of the device isn't enabled in a correct way.
Additionally, this Patch 2 includes Patch 1 (cummulative Patch).
tiamo™ 2.0
Patch 1
This patch eliminates the following bugs:
- when doing a SET, KFT or KFC with deactivated 'Automatic conditioning' a start drift of 0.0 was taken
- when doing an upgrade from tiamo 1.3 to 2.0 the BackupServer.exe wasn't replaced
- the remote interface for the devices 778, 789, 888 and 890 didn't work or wasn't available, at all
- the evaluation with window didn't work with Titrinos
- when switching of the reference temperature for MEAS Cond an exception occured
tiamo™ 2.2
Patch 1
This patch eliminates the following bugs:
- In the dialog window Reprocessing on the tab Statistics, the table is not being shown.
- If the monitoring of the titer validity, the common variable, the global variable or the calibration data has expired, it is not possible to newly determine the titer, the common variable or the global variable via the CALC command ("Save result as...") or to carry out a calibration.
- The program crashes when running MET determinations with Titrinos.
- If the beaker test is enabled and the action "Stop determination and series" is selected in the MOVE command for the beaker test, then the error track will not being run through when a beaker is missing
tiamo™ 2.3
Patch 1
The main improvement with this patch is:
Program part Configuration
- the limitation to two devices applies only for Metrohm devices (Titrino, Titrando, etc.); that means that balances and other generic (i.e. non-Metrohm) devices can be included without limitation.
This patch eliminates the following bugs:
Release Notes (english / german)
