Home
Products
Applications
Service
Support
Company
Contact
 

 

Conductivity standard 100 µS/cm, 5 x 30 mL

The new 912 Conductometer for routine use in the lab and on the go or the fully FDA compliant 856 Conductivity Module controlled by either Touch Control or tiamoTM software.

 

 
6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
  • Composition according to NIST; For calibration of conductivity measuring cells according to USP 645 and EP 2.2.38645 und EP 2.2.38
  • Sterile-filtered and bottled under controlled conditions
  • Analysis by an independant calilbration laboratory (DKD-K-0691)
  •  
    6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
    Composition according to NIST; For calibration of conductivity measuring cells according to USP 645 and EP 2.2.38The standard is independently determined both in-house and by the external calilbration laboratory ZMK (DKD-K-0691). Both independent measurements must compare within the stated measurement uncertainty.The Metrohm standard solution is sterile-filtered and bottled under controlled conditions. The solutions are tested by the UFAG Laboratories (Switzerland, Swissmedic no. 08-187), which are certified to GMP standards, for microbial contamination according to Ph. Eur. (current ed.), aerobic germs and microorganisms (2.612 and 2.6.13). These tests are performed with different samples of finished product. The limit of detection of CFU < 1 must not be exceeded.
    6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
    Weight 0.214
    6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
    6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
    6.2324.110 Conductivity standard 100 µS/cm, 5 x 30 mL
    8.106.3008

    Leaflet: Quality certificate for pH buffer solutions / conductivity standards

    8.106.7541

    6.2324.110 Conductivity standard 100 µS/cm 5 x 30 mL
    Material Safety Data Sheet