High-quality sample preparation in a minimum of space
Control software that leaves nothing to be desired
2.815.3110815 Robotic Filtration Soliprep
815 Robotic Filtration Soliprep allows fast and convenient homogenisation and filtration of solid samples. The rack accommodates up to 24 samples, to which solvent can be added and whose particle size can be reduced. The built-in membrane pump adds any aqueous solvents required, while an additional Dosino can be used for adding organic solvents. This is followed by particle size reduction with the Polytron 1300 D, whose cutting tool is available with or without protruding cutters. During the further preparation steps the Polytron's cutting tool is cleaned at the external rinsing station. Insoluble solid components are aspirated simply and rapidly with the 772 Pump Unit.
After homogenisation a sample aliquot is aspirated at the other work station by a syringe and filtered into an 11 mL vessel through a conventional syringe filter (Luer connection). The Dosino used for sample transfer feeds the sample at a uniform rate through the filter, which results in optimal filtration. Syringe needle and filter are replaced for each sample and dropped into the waste container after use. After the series the support for the 11 mL vessels can be removed from the sample rack and the samples transferred to the analytical instrument, for example an IC. The whole preparation system is controlled by the tiamo™ titration software whose database can document the individual preparation steps performed on each sample. Alternatively, the chromatography software MagIC Net™ can be used for this. The Robotic Soliprep for LC is available for direct connection to an LC system.
The Robotic Soliprep family comprises four packages that cover different sample preparation steps. The core of the system always is the 815 Robotic USB Sample Processor XL, which is equipped with the accessories required for the sample preparation (and connection) concerned.